The Jalopy Journal
An unmilled head will be exactly 4" thick and your numbers appear to confirm this quote from Inliner's: "A few years ago, Tom Langdon, before he...
Look here: http://www.stovebolt.com/techtips/engines/motor_mount_front/index.html
I ran the short shaft setup for a few years but in reality the pump is too low in relation to the rad and if you have a failure on the road then...
You sure make/sell lots of nice inline stuff. Count me as a fan.
Here's a source for the adapter:...
My 2 cents: 1. Stovebolt valve guides are cast iron not bronze and easily available. 2. Shortening and or tapering the guides will not give...
With the flat spot on the weight parallel to the ground (approximately) is heat on. As the spring warms/relaxes it allows it to tip towards the...
X4. 12 volts will also make you 6 volt horn scream but the same applies....just don't lay on it for too long.
Yup. the fine threaded ball joints in my setup provide for extremely fine adjustability making it real easy to get them singing in harmony.
My solution:
Ain't that the truth. The dual solid linkage is bad enough and I think syncronization with the triple one would be hopeless. Seems to me the only...
I put lifetime warranteed sprayed in bedliner on the underside of my fenders and hopefully will never have to deal with this. The good stuff goes...
This article may prove useful when trying to match internal components: http://www.inliners.org/tech/tech4.html
I don't know where you are but Mopac in Edmonton stocks the Edelbrock branded one. Mine was a non working POS too but since they were on the other...
My thoughts exactly.
Pretty close...Amsoil rates thier bypass filter at 98.7% absolute effiency at 2 microns which insures the oil in my stovebolt 6 never darkens from...
Parts to make that mill more user friendly are in continuous development. Here's the first rear sump pan:
I got as far as making a flow bench adapter plate and nozzle, cutting up a head thru several planes to determine wall thickness, milling various...
Here's the adapter to mount a 235 cover on a 194, 230, 250, 292. Must be some demand to warrant stocking/offering it....
+1. Just got back. Denise's suggestion of a burger at the Sidetrack in Ypsilani was a winner too.
Separate names with a comma.
The Jalopy Journal
