The Jalopy Journal
Has anyone here seen or used the 32 Ford grill insert that Obsolete & classic auto parts (formerly Obsolete Ford parts out of Oklahoma City) is...
I'm trying to upload photos to imgur, so I can add to this post, but it's taking forever. I installed the firewall in my Brookville 32 roadster...
Building my 1932 Ford roadster's trans tunnel today. I'm 6'6", so leg room is important. How much should I offest the trans tunnel from the trans?...
Getting deeper into my 32 Ford roadster (Brookville original style body). I have no problem making door panels and kick panels, but need some...
Finishing up 327 Chevy for my 32 roadster, installing the oil pan. Very clean gasket mating surface on the block, brand new Dorman oil pan (which...
I'm just put an Edelbrock performer on my 327 with camel hump heads - used felpro 1205 gaskets (these are performance gaskets that do not have a...
Just had an "Oh Sh!t" moment...Was freshening a late 60's 327 and when I removed the cam, started wondering about the roller cam in a 1987-ish...
Is it acceptable to have a pressure activated brake light switch between your master cylinder and a residual valve? I'm pretty sure you might...
I am putting together my 32 Ford roadster hiboy... I have an old 327 small block that I'm using in it- and probably doesn't have more than 350...
I just ordered a SoCal Auburn style dash insert and the guy told me that you cant install that in a stock style 32 dash - said you have to extend...
So, ae some of you may know, I'm getting back to finishing my 55 F100 (took a break on it while I raised my kids)... I have a 383 small block...
Whats the concensus on the best small block chev engine and TH350 transmission mounts. Anyone have a brand/part # they commonly use and trust?...
I have made a lot of brake lines in the past but have never had to deal with pipe thread fittings (through the frame fittings and proportioning...
I have to coat my 1955 Ford F100 frame - there are several modifications to it since having it blasted, so I plan to take it for a touch up blast...
I made my exhaust using aluminized steel mandrel bent pipe bends from summit racing and MIG welded everything together. I'm looking for something...
Just got a Brookville 1932 roadster body - have built fiberglass cars before and they had a steel member behind the dash to bolt the column drop...
I am building a 1955 for f100 with discs in front, drums out back - GM proportioning valve. power master cylinder is under the floor. Do I need...
I'm finally getting around to doing the brake lines on my 55 f-100 (Fatman fab front suspension, 9"for rear, master cylinder under floor, body off...
Anyone have suggestions on a cheap, but workable bench seat for a 1932 Ford roadster? ~thanks ahead of time
Cranking away on my 55 F100 pickup... No cab or bed on the frame right now and I'm building the chassis up as a roller complete. I'm fabricating...
As you may know I am re-doing a somewhat custom and modernized 55 f-100. I have removed the shock crossmember and done some modifications to the...
Had a bunch of kids and stopped working on my cars for almost a decade...now I'm back, so hello again everyone. I have my 55 f100 fully...
Greetings from PA...lived in LA for a long time and moved to Northeast PA for some reason. They don't even know what a traditional rod is here and...
Need some suggestions on headers for this f-100 project. It's getting a 383 Chev with a roller cam ground for seat of the pants torque (480 TQ,...
Separate names with a comma.
The Jalopy Journal
