The Jalopy Journal
My daily driver/parts chaser. Might have to warm it up one of these days. [IMG]
[IMG] [IMG] [IMG]
Wow, that was wrong! Jade something... Anyway, I fixed it. CGJ.com I looked at my order and my radiator started out as a 4013c. Bought it in...
Yeah, it was a '32 radiator in their catalog but I don't remember which one exactly.
Check their website cgj.com, they have ever application imaginable. They had no issues on making changes also. I don't remember what radiator I...
I know, one thing at a time, but... this from a guy who puts a Plymouth in a Ford? Kidding, of course, whatever blows yer hair back!
Just wanted to pass on a couple pics of my new radiator for my '34. Didn't really want the look of a fabbed sheet tank aluminum but didn't want...
Hey Koz, what ever became of this build? I enjoy your build threads, down to earth good stuff, lots to learn.
I have a couple Ford column drops and need one for a '32-'34 Ford truck with the proper angle to fit dash. The one laying on the floor I am not...
Sold. Thanks Maratrodz, great guy to deal with and a nice family too! Matt
'33 Ford pickup cab, has been channeled 5", firewall has been trimmed for engine clearance. Average condition old cab, windshield frame has damage...
'34 next door [ATTACH]
My '53 daily driver, just broke 10,000 actual miles. [ATTACH] [ATTACH] [ATTACH]
+1 on the gray scotchbrite and use an abrasive paste like Final-sand, a product designed to be used with the scotchbrite for prepping clearcoat...
This was in a project I bought and was recently built, has maybe 1000 miles or less. It was behind a '34 commercial grill that had been chopped,...
One I painted and did the doors and all a few years ago for a friend. [ATTACH] [ATTACH]
[ATTACH] My daily driver... just broke 10,000 miles.
Just a follow up and thanks to Dick Spadaro and all who replied; got a set of very nice axles (thanks Andy49) and that took care of the problem....
Not sure on the spiders, guessing they were used when this was originally assembled (not by me). I don't think they were originally mated with...
Yeah, pretty nasty and the tapers are a bit rough too.
Well, finally got the banjo out of the chassis for a while and took it apart again. End play is good. Axles are 32 3/4 inch 18 tooth and all 4...
Thanks guys, I actually have a fairly complete project rather than just a cab. It was a '33 cab on a '28 chassis with a '28 RPU bed and was...
Thanks to all, I haven't checked the length but I did do a tooth count early on as I thought a gear mismatch seemed like the most likely culprit....
But wouldn't my carrier preload be way loose then?
Carrier bearings or ? Everything turns fine and free, just the axles are both spinning the same direction. Carrier bearing preload is good....
Thanks, I have set the carrier preload and pinion backlash with gaskets ending up with .019 on the left and .010 on the right. I have .006...
Help! I am reassembling this banjo after replacing carrier bearings and having an interesting problem. This is off of an unfinished project I...
I'm a longtime lurker and a new member here. Thought it was time to get on board as I am starting a new '34 Ford truck cab project and certainly...
As a long time lurker here at the HAMB and a recent member, I would like to welcome this thread into 2014. This is my first post and I was...
Separate names with a comma.
The Jalopy Journal
