The Jalopy Journal
Hot Rodding has lost one of the good guys. Larry May of Keokuk, Iowa has passed away this past week. Larry was known for his 34 Fords and his...
Kinda blurry but you get the idea?[ATTACH] [ATTACH]
An early picture of mine.[ATTACH]
Thank You
Who is your foundry? I use S.E. Iowa and they are closing next April.
Use a mill for the table. you can use double face carpet tape to hold the piece and move over X amount every time[ATTACH]
Turn down a 5/16 bolt and round the head.
I have a 200 in this behind a 355 Chevy. Got it from a tranny rebuilder in Kansas City, mo. years ago. still works great.
I used a "see the light" one. sticks to the glass and has worked for 20 years.
Have someone make you some out of aluminum with a bolt on cover in the back.
Money tree in the backyard.
I know a little bit about everything and a whole lot about nothing.
I would look towards the MC, if mine.
Lock tight Hydraulic thread locker.
I did two things. 1- ran a wire off the positive side of the battery through a all weather push button under the car and to the drivers door...
Push it out in the driveway in neutral without starting. Noise then?
Looks good
I saw one of these at a Car Show in Washington, Iowa. Had a flathead Ford in it and you couldn't tell it was running when it came in.
Plastiguage is your friend.
This day and age, if you find something you want, you best go get it right away because there is too much chance if you wait.
Oreilly's sells the old silver heat tube that went from the air breather down to the exhaust manifold. It works great to make a pattern.
Dumb question. Is the bolt going thru the side terminal bottoming out in the hole?
Should work. I would definitely glass the underside with a couple layers of matt.
[ATTACH] I built my hood hinges. After painting the hood I used panel adhedive to glue the aluminum to the hood. 15 years ago, without a problem....
We use one with a 2.95 gear and no lockup. Works great.
I helped with the install of the complete floorpan with braces on a 55 Chevy 2door sedan purchased from Danchuck. It is a big undertaking but it...
So unhook the sender wire on the back of the gauge.
North of Quincy, Il.
My battery is behind my rear seat. When I need to charge it, I hook a small charger to the hot post on my alternator. Seems to work well.
Separate names with a comma.
The Jalopy Journal
