The Jalopy Journal
XXX got the firewall cut out. Body getting close to get sand blasted..[IMG][IMG][IMG][IMG][IMG]
Got the driver quarter welded in...[IMG][IMG]
We got new driver side quarter fixed in and ready to weld in.[IMG][IMG][IMG]
I love both. Awesome theme song!!!!!! thanks Clik and Frank
Chad, We are its just to cool!!!! Not to keep it and hang it up...
Well frame is mocked up. To the point we need the body on so can install the cage to help sure up the frame. So now we got the body in shop...
Leaf springs brackets tacked on and back shackles mounts made and tacked in place.[IMG][IMG][IMG][IMG]
Back half fabbed up and tacked on and leaf springs mocked up.... [IMG][IMG][IMG]
Yes sir, It will be full frame all aluminum interior. 4130 chrome moly roll cage. We have tried to lighten the car as much as possible. And we are...
We got the ladder bar mounts tacked on to frame rails.[IMG] [IMG] [IMG]
[IMG] The starting of the ladder bar brackets.. [IMG][IMG][IMG][IMG]
Thanks, II FUNNY I just got off the phone with Quain about 30mins ago. He said they had a blast!!! We will be planning on next year to come up....
We are running a ford 9 inch housing and thinking a 456 gear. It will stand up in front a couple inches higher than rear. But we are keeping the...
main rails done and front end mounted. I built in 11 degrees of caster by raising up the front spring eye up into the frame rail.....
[IMG] This is the machined insert I made for the front of the ladder bar to provide a little adjustability.
[IMG] [IMG] [IMG] These are the ladder bars. 2x3 tubing , center to center 42 inch minimum. Also lightened a little.
[IMG] The steering rod may look a little large but it is 4130 Chrome Moly.
[IMG] Added new king pin kits and a disk brake setup. Later on we will be doing a little lightening on the brake components.
[IMG] This is our front axle. this is old skool. A 59 chevy truck axle, narrowed 7 inches, lightened and added a little caster by machining the...
Yes sir, that's the goal. Hope to be hitting the track in oct.
Thanks, for all the encouragement everybody!!! I will never be able to top the fulfillment i received being apart of the MOONLIGHTER project.....
[IMG] That me kneeling in front of a few of the folks that got me interested in the Gassers. this picture was taken in front of Gene Cromer's...
After being involved in the resurrection of the 41 Willys Gasser, owned by Gene Cromer "The Moonlighter" I decided to build a Gasser from scratch...
Quain, Low-Rays has donated all the sanding supply's. Like sand papers etc. Rick Miller the soda blaster supplied the soda as well. There's so...
Hey Guys, Thanks for all the kind words. My friend David Gregg is the one that got me interested in the project and introduced me to Quain...
Separate names with a comma.
The Jalopy Journal
