The Jalopy Journal
here is mine 3" with stretched roof. only chopped the rear window 2" for better visibility. [ATTACH]
four barrel uses a different rod that a two barrel. readily available or modify the o e you have to work.
8" from a maverick 56 1/2" wide
they are called battery compression lugs
[ATTACH]
I cut mine 3". Cut at the bottom miter joint. It will fit together just need to push sides in by hand until the bottom slides into the vertical...
I got a roof from a early 1980's Volvo wagon it doesn't have any ribs so it will work like you are planning to do. Have not installed it yet...
I have a picture for you but I can't get it to upload keeps saying file to big.
Where did you get the wood bows? I haven't been able to find any one to return messages woodart and Ford wood are terrible for customer support
I used a shifter for a 70 chevelle with a console. It put the shifter in the center of the car handle is a pick up one worked perfectly. The...
I am building a 34 with other rear spring set up with the spring mounted under the frame rails. It looked like it was pretty cramped in the rear...
Thanks for the information and pictures. It confirmed that I can still read a tape measure. If looks like I have some more cutting and welding...
I know I have seen what appears to be no modifications to the firewall other than the distributor. I put the motor in for a test fit and it...
I have a running 24 stud flathead motor and 34 transmission for sale. Engine runs good has small oil pan drip. Comes complete with everything...
Have you set the body back on the frame since you put on the rear suspension? I'm curious to see if you have to modify the rear floorboards for...
Dirk35 would you recommend this rear suspension or go a different route? It sounds like it rides very rough
I would like to publicly thank stillrunners for the door latches. He was more than generous. I made a donation to the highwayman's y block fund...
How does the car ride with the parallel leafs? I am in the beginning stages of building a sedan and don't know what type of rear suspension to go...
I just measured mine they are 8" tall and 4” wide. That is 8 tall not including the lever just the body of the latch mechanism. I can't get the...
Those look like they are right. It looks like they are missing the internal door lock mechanism. If you want to sell them send me a pm
Mine are exactly like yours the same pivot on the driver's door. Too bad we didn't have the opposite latches I would trade instead of looking for...
Does any one know which way they should move to open forward or backward since I have one of each.
Should the handle push forward to open. It seems like that would make more sense.
I have a 34 Ford tudor with the interior door handles in the middle of the door. The passenger side you push the handle forward to unlatch the...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] Five window coupe with steel front fenders and glass rear fenders. 383 Chevy with roller cam edelbrock rpm...
Front fiberglass fenders for 1932 Ford. Rock valley 1932 fors stainless gas tank with fiberglass cover. Tank would also work good for a...
Separate names with a comma.
The Jalopy Journal
