The Jalopy Journal
Is the ford and mercury throw bearing arm for the bell housing the same and be used in either ford or mercury car in 1951 ?
Thanks for all the input , I found the size and length I needed in the doorman catalog , call the local auto parts store ( autozone) and they had...
Where do I find lug bolts ( not swedged type ) serrated shoulder to fit 1946 ford truck 1/2 ton rear brake drums , I’m having trouble locating them
I’m trying to find info on putting a 1932 short pinion shaft in a 1931 banjo housing that has the long drive shaft without modifying, or does...
Need a 4 bolt clam to attach the closed drive shaft to transmission, have a 6 bolt I can trade if wanted
Mine is a 1930 rearend with the long solid steel driveshaft , can I put the short pinion shaft from a 1932 or later in it without mods ? To use a...
The one I got is a 1930 it has the solid steel long drive shaft , so can I put the short pinion shaft in it from a 32 and use it to make a custom...
Will parts from a 31 model banjo rearend fit in a 1932 banjo rearend ? the drive shaft setup with long shaft on the 31 and the short shaft with...
Thanks , now to find one
The 31 rearend I have has the 6 bolt clam bolt up on the torque tube but my v8 60 transmission 1938 model has the 4 bolt to attach , what’s the...
I’m about 3 hrs away in the bowling green ky area if he wants to get rid of it , thanks
Any body near ky have a scrap v8-60 block , I’m looking for one to use as a mock up piece , don’t need the internals just a block , thanks
Thank you for the information, deeply appreciated
Is the pilot bearing on the 1937-1940 v8-60 the same size used on the larger v8 flathead engines ?
None
Thanks , does the gasket go on top or bottom of it ? Or do I need 2 gaskets ?
[ATTACH] =full]5280365[ATTACH] [/ATTACH]
I found a metal shim under the shifter plate on my v8-60 transmission 38 model , new gasket set only has a gasket , so do I need the shim , looks...
Are they all tapered shaft , what I have is semi float that bolt on with bearing carrier ?
Thank you so much , that gives me a good option , but if I’m understanding correct the jeep axle has a different shaft spline count than the 41...
Separate names with a comma.
The Jalopy Journal
