The Jalopy Journal
Here's mine....well the start anyway :).
btt
Did you get the top sorted yet? Driving?
What I did was pretty simple. I purchased an old non piloting tapered Ford kingpin reamer off the web cheap. I then found which bushing on the...
I just mocked my Phaeton up a few weeks back......
Have you considered the 1930 aprons. They more or less start at the front of the cowl and go back where as the 28-29s are 6 or 8 inches longer in...
Here's what will fit with no modifications; 21" wires (1928-29) 19" wires (1930-31) 18" wires (1932) 17" wires (1933-1934) 16" wires...
I agree. My 28 doesn't have door handles.
BTT lets see more
I love your plan with the heavy chop. That is going to be one mean ride.
I'm thinking 500-600 MAX with that rustout on the floor.
Cactus, Ill snap some pix for you guys and post them tomorrow.
My Atlas has this neat accessory intermediate pulley. It does slow it down a little.
Any updates?
RIP No talk...losta walk!!
I have to say it....I LOVE that nosebleed stance. Dont change a thing. Amazing ride and great story.
As mentioned above. Find yourself a stock "A" rear crossmember and an "A" rear spring which should be pretty easy in your neck of the woods....
If it hasnt been mentioned already....go to wescott's web site and look under the Technical section. There you will find a detailed diagram of a...
I am so sorry. Glad you are OK.
Thats what I was hoping on the axle. Now if anyone knows about the spindels...perch pins....front X member...K member....??
I like the idea. Something different and with taste is alway a refreshing change. Check out Westcott's website under the tech section and find...
Fellas, Ive got a line on a one ton 32 chassis. I know everything from the K member back is of not much use...question is....has anyone used...
One of my all time faves.....looking forward to some outside shots when completed. Thats one bad mama-jama. Thanks for posting!!
BTT. Lets see more
Im sure you've already read this...but if not...Its very helpful. http://www.patricksantiquecars.com/articles.html
Ha..great stories and thanks for the replys. One more question you guys may know. There is a bore behind the rivet ram on the top front of the...
I picked this up riveting tool a few summers ago at a farm auction in Kansas for 10 bucks. It was a nice weekend in Texas so I decided to clean it...
It appears you have '36 wide 5 brake drums on that front end. I think the axle is the same 32-36 front axle. Unfortunately, the drums are not...
For the day shift!
Now put the 17mm socket and washer between the kingpin bosses and pass the allthread with a nut on the end through. slide the larger socket...
Separate names with a comma.
The Jalopy Journal
