The Jalopy Journal
Bob - That I how I understand it. Have read very positive reviews on other websites. Would be interested in your thoughts after you have painted...
Thanks guys - this is how Will, (a paint chemist, formerly with HOC and started company) explained it. They sell direct with no middle men. Some...
Anyone have any knowledge or experience with Ure Kem paint. I personally hadn’t heard of it but a couple local guys have used it on hot rods with...
Type of car will effect price (roadster, coupe, sedan, fenders/no fenders, color - red more expensive). Last one around here, 35 3window, with...
Looking for seat ideas some of you may have used with a 34 Ford PU. I currently have no original seat or seat pan. Any help or ideas would be...
Jim - I think some would appreciate a close up of 38 and the Essex not to mention the stash of Flathead parts in your barn!!
Was wondering what some of you have found for a seat and a column that works well in a 34 Ford PU. It is a stock cab, is cross steer with Vega...
Great Pics. Model A coupe (pic 15-18) a final 8 pick, was quite a build. Young guy 25 yrs. old did most of metal work.
[ATTACH] Brand new SoCal narrow disc brake kit. 4.5 bolt pattern. Bolts directly to 37-48 ford spindle, no adapter needed. Check So Cal web...
I am also at this point. The picture is interesting. How much shock travel did you end up with. I know there are a lot of 32-34 FF pickups,...
S-10 T-5 tail housing with shifter. $75
TTT
Original 34 axle dropped by hamber Thunderbirdesq (Andy Kohler of Kohler Kustom) $300 plus shipping. 34 Front crossmember with radiator mounts....
The gear others are referring to is a melonized gear. It is recommend for roller cams. Lots of sources for it including GM.
Wondering what methods some of you use in taking out old spindle bushings. Want to replace them and new king pins. Thanks in advance.
Thanks for the information and excellent pictures. I have a dropped orginal axle that is a touch over 48 inches. Trying to visualize the tire...
Don - thanks for the information. Questions: What disc brake setup did you use and would your setup work with a 47 inch axle with maybe a...
Rich - thanks for the response. I have done quite a bit of research. I prefer to use a dropped original as I feel it is safer. The 47 in by...
I am looking for help in determining what width axle to put under a full fender 33-34 Pickup. I have talked to many suppliers but no one can give...
Thanks for the photos. Cool, Cool, RPU you built, read your build thread, amazing work! Like the Primer/color scheme.
Putting together a 34 full fender PU for my wife to drive. Would like to get it to handle as well as possible. Do the aftermarket cross members...
Have the same question, only car will have fenders. Concerned about tire/fender clearance.
Vent - Sold Fenders $100 Latches $50 each - all 3 for $125 (see above) Crossmember $50 Door Covers $50
[ATTACH] [ATTACH] Still learning but has potential
Model A cross members are made for these frames and allow you to get a correct caster setting when using dropped axles and rubber rake on these...
Looking for a aftermarket Model A Crossmember to put under a 34 Ford Frame. I know many companies sell them. Does anyone have a recommendation...
Cowl vent with handle - $25 Front Fiberglass fenders, never used - $125/pr. Front Cross member - $75 Top of Door Access Covers - $50/pr. 3...
What is involved in adapting 1935 Ford wire wheels to a standard 5x4.5 Ford bolt pattern? How much wider does it make the track width. Thanks
Caddy - I must not of explained it correctly. What I meant was after the original 34 is dropped 4 inches, I was told the kingpin to kingpin would...
Baron- Thanks for the leg work. Sounds as if that offset would pretty much equal a 47 in axle. Just not sure how much the disc brakes widen the...
Separate names with a comma.
The Jalopy Journal
