The Jalopy Journal
My bad, I forgot about the full size Ventura. That is what you get for bring up so late. And I have owned three full size Pontiacs...go figure.
What motor do you have? 215, 326? Did you put in a 389 or a 455? Tri power will be too much for a stock motor, but the bigger ones will love it.
66 International Travelall with a V-6 GMC Diesel in it. Setup looked great except for the PVC pipe and duct tape used between one air cleaner and...
Anybody have a pic of this type of setup?
What about a 2.3 turbo motor? I met a guy in Lantana Florida that had a Met and ran a shop building up 2.3 and 2.5 Ford motors.
My bad.
I heard something about the crayon method? Something like cut at the point where the crayon burns off?
I have yet to hear about resonators and the change in volume. We have put the exhaust in and have room for resonators the size of a glasspack...
I got one near Albuquerque NM. Send me a PM if anyone wants it. $75 obo.
Speedway has a kit, but I am not sure if it is just the secondary throttle plates or everything else included. I can't find my catalogs.
JB2, I hope your recovery goes well. As for others, any more experiences between the difference of a muffler and a muffler with a resonator?...
Autozone always starts - number one by consumer reports. I did not start my car for three months, on court day my truck broke down, the car...
I was looking for that!. I have his book, but it is in storage somewhere. Has anyone used resonators and know the sound difference between the...
Are FloJos mufflers or someone's artwork with pipes? Never seen anything like it before. How does the core diameter affect the volume of the...
I searched Ebay and other sites for Chrysler Imperial muffler. Ebay did the weirdest thing where I kept getting 34 results whether I put Chrysler...
Use a headlight/dimmer control. The dimmer controls the flow of water to the heater via an electric valve control. The headlight provides two or...
You might not want that. At max temp, would you always want full blow?
Wasn't there a concept car that had a turn signal built into the steering wheel? It looked like the horn bar, but on one side you could flick it...
The problem with the stock exhaust is that it is a single 2 1/4" slowly rusting away. At idle you can not hear a thing. I accidentally restarted...
Fresh interior, weatherstripping, with extra insulation on floor,hood, roof, firewall, doors, and behind rear seat. Dynamat and aluminum backed...
Oh God!?!? Just what I did not want to hear. I need a real answer.
I have been searching through this forum for two hours looking for the quietest muffler. I keep getting suggestions for smithys, porters,...
You can check the rivets, but for the most part, the crossmembers flex to move with the frame. For most driving situations, you will hardly move...
I found a pair attached to a bumper. There was a bumber guard/riser and it had a tube connecting the risers above the bumper. After taking the...
Do you have pics of the two different carbs? In terms of cubic inches they are close enough
Transverse spring does not require a panhard bar, coil springs like Nascar uses does require one.
What is the price range for one of these things? I plan on selling it on Ebay, but if someone here wants it...
305 cost more to rebuild than 350s, plus there are more 350s than 305s. Also, there is no substitute for displacement. So the thinking is, why pay...
I plan on selling this grill for a friend, but I need to know what year it is for. I thought I heard my friend say 41, but being hearing impaired,...
Put a front. If you find yourself oversteering alot, do not put a rear bar. You may just need to lower the rear tire pressure a bit to increase...
Separate names with a comma.
The Jalopy Journal
