The Jalopy Journal
The guitar is a 12 string electric.
RC is the best Cola ever, still drink it today. Sometimes it is hard to find.
Jerry, is the other side of the bed the same as the one you are showing? Looks like the bed has been taken off the frame. Was it the same when...
I think that the shoe box is painted with a brown base coat with a red pearl coat next and then clear coated.
Here is a link on how to start and drive a Model T [MEDIA]
If you are in your seventies or older you can really appreciate how much things have changed over you life time. Technology has changed so much...
I really enjoyed seeing the Brass Era cars with all the "high tech" innovations like acetylene lighting. Only saw a few of these in person on the...
Looks like it could be 1911 or 12 Mercer.
Here are links to articles on the El Morocco: https://www.motortrend.com/news/12q2-1956-1957-chevrolet-el-morocco/...
French Market area New Orleans
This is the Pontalbo building located on the corner of St Ann Street and Decatur Street. Cafe du Monde is across Decatur Street (right side of...
Delta - C&S stands for Delta and Chicago and Southern when they merged. Later just became Delta.
1958 Packard
The louvers would have been hand formed at that time period. The louvers would have been put in the panel first in the flat panel an then the...
If I remember correctly B & M used the duel range hydro for the starting point of their racing transmission. I have a 1958 Bentley that uses a...
When you open the picture of the Skylark it says 1952 Skylark. It also has real knock off wheels.
That is a rotary dryer on the truck. Feed end is at the cab end, discharge at the rear of the truck. Depending on its use could be refractory...
Think the badges are LaSalle and Cadillac
Old Harper
MrBill, Here is a Chinese proverb for you. "The person that says it can't be done should not interrupt the person doing it." Your project turned...
This is a great addition, thanks for adding it.
Here is a tip when buying equipment at auction from a place of business like a machine shop. The first place to go is to the foreman's office and...
ClarkH, your accomplishment with this project is just amazing. Congratulation on completing your vision by overcoming many problems and...
The crimping presses were very similar and would usually work with different dies that did the crimping. The dies in many cases were specific to...
Is 444 his cell number??? The air compressor hook up is interesting.
They were in the school of "Hard Knocks" and learned a lot about life.
Clark, Glad to see that you were successful in getting the stud out, knew that you could do it. I did enjoy our talk this morning. Keep up with...
Are their any updates?
I have welded nut on bolts and studs above and below the surface to remove broken fasteners and it works fine as long as the broken fastener is...
Separate names with a comma.
The Jalopy Journal
