The Jalopy Journal
I have my Dad's 1939 Ford Deluxe Coupe - 327 Chevy and Muncie 4 speed - unsplit wishbone front. In years past when the engine and or trans needed...
Thanks to all for the great reply’s !! Was going to buy repo 1939 - they are big time on back order - repaired original will be better anyway !...
looks great - just ordered some PC-7 online.
I have an original 1939 Ford Banjo steering wheel - good shape except for the cracks along the outer portion. What is best method to repair /...
Has any one used a 39 petal set to activate a Chevy Muncie 4 speed. I have a 1940 set of petals and z bar - still need about 3/8 inch on the...
have a Miller 211 - run it on 220v - great welder. Love it - we use them at our Dealership body shop - no problems.
I have used manual Vega (Flaming River USA 1/3 stronger) and mid 1960's manual 525 Saginaw. When I installed block headers on my 351W - went with...
Put Porter steel packs on the 1939 Ford Coupe - 327 and 30/30 solid lift cam and 2.5 Ram-heads - mandral bend 2.5 system. Really sounds nice -...
I changed out a original 1940 Ford Coupe tank - set years with crudded up old gas and flakes. Got the original tank out OK - but tight. Bought...
Put Corvette ram horn 2.5 inch manifolds on a 327 in a 1939 Ford Coupe - Vega box and stock steering column and straight axel - driver side...
[ATTACH] My garage with finished and part complete 1939 Fords.
I have a 1939 Stock heater unit that I adapted a 12 volt motor - have a push - pull for the water flow - only thing missing is variable speed type...
My Dad's 39 Ford has a 327 out of a 1964 Chevelle with 30/30 cam and Vette rams manifolds with Muncie 4 speed and Columbia 2 speed rear. Got it...
I have 600 CFM E-brock carbs on 3 of my street rods / hot rods. All elect choke versions - 1939 Ford with 351-w build to 1969 4v specks with...
My Dad put a Cloumbia 2 speed - 327 Chevy and Muncie 4 speed and used the 46 / 47 Ford truck yoke to adapt the 2 speed rear end w/closed drive...
I put the Porter shorter Steel Packs on my 1939 Ford Cpe - with 327 SBC and 30/30 cam - 2.5 inch Vette Ram manifolds - 2.5 dia pipes. Really...
Owning several 1940 Fords - I have had cooling issues. Current set up with electric fan - I run a 70 amp relay with a temp probe made by Vintage...
I have a disk brake kit on my 1939 Ford Coupe with the 5 on 5 1/2 circle. Uses a F-150 Rotor and big GMC caliber - as in mid 1970 Impala and...
I need to get my 1939 Ford hood punched - live near Concord, NC - close drive. How much per louver? Thanks.
The 39's and 40 Ford are my favorites. I have a few. [ATTACH] [ATTACH] [ATTACH] [ATTACH]
I put a 30% larger Vega box from Flaming River on my 1939 Ford coupe about 4 years ago. The block hugger for my 351 SBF hit the bigger Saginaw...
Sam at CCI called me after a few days and a second inquiry. They will sell replacement motor for $125. This older style is about 4 inches...
Driving my Ford last weekend, and after 16 years - my Cooling Components fan with shroud quit running. I sent email and left message to purchase...
I have an interest in lead body work. I have my Dad's 1939 Ford with lead body work and lacquer paint from 1970. The paint is lifting off the...
The 1940 Ford had "fixed" windshield - ie did not crank out. The above frames look like 1939 Car frames. I have 2 39 coupes - one is original...
I have original 1940 rear end - love to change to Bendix type like your top pic - but hate to spend the $600 to Bob Drake for the kit. Do you...
I have my Dad's '39 Ford - has open drive shaft w 327 chevy and 4 speed to a Columbia 2 speed rear end. We used early 1960's Chevy pick up truck...
I have my Dad's 1939 Ford - it has a Columbia 2 speed in it for the last 50 years. I do no have the dash controls - that is the expensive part to...
WOW - Very nice job - I might try to locate some stock gauges to rebuild - Thanks for the pic - great job!
What vehicle are the hub caps from ? Looks nice.
Separate names with a comma.
The Jalopy Journal
