The Jalopy Journal
All I see is X marks no pics
Stupid question, what is intermediate coils
Where do I start looking to find shorter coil springs to lower rear down. Called couple of big name companies and no help . 1948 oldsmobile series 76
Thanks tube was collapsed so plugged that hole and used the bottom
Thanks will jump on that when sun comes up
Inspected tank clean , car has been running , repaired a rotten portion of line , removed hose from tank fitting and to my suprise no gas ....
Looks like a fancy place
1948 oldsmobile fastback series 77 looking to see cost on 3 to 4 inch chop top
Upon searching site I see recommended companies and people are back 10 years are so . I am not sure what there is out that chop tops in these...
Ok double bowl mc under floor new rear drum brakes front disc brake conversion residual valves installed new lines adjusted brake pedal bled...
Yes bled master cylinder , yes took play out of pedal , residual pressure valves ? Never heard of those will research
Ok this is where I am , 10-2007 double bowl master cylinder under floor, new rear brakes and adjusted, front disc brake upgrade , new brake...
Yea saw those , original question was what options I had before I buy and I thankyou
Yea front drum brakes are good just wanted to upgrade to disc brakes . I was hoping someone knew if the chevy and oldsmobile front end are the same
So I guess it's off to ebay thanks
Want to upgrade from drums to disc brakes using just a double bowl master cylinder . What are my options?
Where would I get parts for original axle . Chevy axle would that be like a 10 bolt
I have installed 350 rocket engine and 350 transmission what would be the best route to go for the rearend . The one in car is trashed
Anyone have a car are manual with a picture of what I am looking for
Yea I dont have anything just a hole where a rod must have gone through
All I have is a hole in the floor . What do I use for a gas pedal ? Car has a 350 rocket engine 2 barrel.
So npt fitting with a barb end and a piece of hose should work right
This is mine
Anybody
Finally got broken supply fitting out of tank. There is no nut on existing line. What size fitting do I need ? Is there supposed to be a pickup...
Ok seal is out where do I buy one from
Thanks to all
These bolts
1948 oldsmobile rear axle removal , is it just the 4 bolts on outside flange is all I need to do ?
1948 oldsmobile rear axle housing mounting bushings where do I purchase those from ?
Separate names with a comma.
The Jalopy Journal
