The Jalopy Journal
Yes it does. But a fairly cheap fix.
Here's the video. http://vid752.photobucket.com/albums/xx167/ronr2/Video/32 ford startupwith ag2.mp4 Start up went fairly well. The brand new...
Dynomax Super Turbo mufflers with a Jegs 2 1/2" street rod exhaust kit. Wish the exhaust kit had a few more 45' bends in it, but all in all very...
Drivers side exhaust completed , at least back to diff for now. [ATTACH] [ATTACH]
I might have to if this does not work.
So-Cal speed shop alternator bracket. [ATTACH] [ATTACH]
Hanger bracket. [ATTACH]
Some progress on the exhaust system. [ATTACH] [ATTACH]
Good luck! Lots of a ideas on the web to look at, and see what you like.
Thanks. Good luck with your build.
20" trans cooler... [ATTACH]
Bleeding the master cylinder. Found some leaks at a couple of fittings. [ATTACH]
Finished the fuel lines today. Starting on the exhaust. [ATTACH] [ATTACH]
Thanks.
Ran fuel line thru frame. [ATTACH] [ATTACH]
Master cutoff... [ATTACH] [ATTACH]
... [ATTACH] [ATTACH]
Battery box install. Snaking cable thru frame. [ATTACH] [ATTACH]
Drilling holes for fuel lines and battery cable. Getting ready for wiring. [ATTACH]
Cut off switch. [ATTACH]
Here's mine. 3/8 rod, drilled and tapped to 1/4-28. QA1 hiem joints, Speedway bellcrank, Lokar cable. [ATTACH] [ATTACH]
Ground down the heads of the stainless bolts and polished it all up. Ready to install. [ATTACH] [ATTACH]
Making linkage for the Moon pedal 1/2 rod drilled and taped to 1/4-28 for QA1 CMR4 hiem joints. [ATTACH] [ATTACH]
Your right. It's on my short list.
Better shot of the Moon pedal. The metal plate, for now, is bolted to the firewall with some small nuts and bolts. After I expoxy the mounting...
Shifter mount still needs some legs to add a little more stability. [ATTACH]
B&M prostick works with an overdrive automatic. Moon pedal all mocked up. Brake pedal is from a Harley.[ATTACH]
Shifter mount. [ATTACH]
Bottom hose. Gates 20242. 1956 Chevy. Fit perfect, no trimming required. [ATTACH]
Upper radiator hose. Gates 20607. Straight ahead thermostat housing. The cut off piece is sitting on the manifold. [ATTACH]
Separate names with a comma.