The Jalopy Journal
My power steering is the original unit in a 80 front clip and its loud when its starts to get to maximum turned direction both ways .What would...
I put a LED in my dome light so it prevent melting of the lens if it got to hot and it works fine .Another plus is I left door open all night by...
from what Scott posted the Idler is the same and just the pitman different
Will the pitman arm be different then the power steering one ?
Yeah seems a bit much but if its a easy swap it be worth it .Is it a simple take out and put in procedure ?
My 56 chevy truck has a 1980 camaro front clip with power steering and I an kinda thinking I want to go the minimalist route and eliminate stuff...
I did put new headlight connectors so rewired them .Is it both or just one headlight that would make it do that ?
So I did all my wiring in my 56 chevy and it came out good but one slight issue .When I turn on high beams the indicator light goes off and low...
Yes followed that as my original headlight switch was a ron francis so it had exact same mount .The power goues thru the switch for sure but for...
Oh and one tail light stays on
So I have been upgrading my 56 chevy truck elect and ran into a problem .I have a r francis wiring system and just added a few relays and such...
What is best way to ground switches etc ?Is it suffecient enough just to ground to dash ?
Looks clean . I have a Ron Frnacis complete wiring system but it does not have the relays other then just basic stuff .I just need to add four...
That one doesnt come with relays though does it ?
Thanks guys .Here is details dont say too much tho. http://www.summitracing.com/parts/arc-1440/overview/
I am not a expert on elect but I was going to run some standard relays for horn ,fuel pump etc and I came across this and it looked kinda slick...
I dont see what the difference is since people put air shocks all the time .Isn't that the same idea to give the rear extra stiffness or lift ?
Exactly and I want the bed to look stock so c notching will cut into bed .I know there was another guy who did this but I can find it now .
so another words go with the lightest rate avail
I flipped my rear end on my 56 truck and I am not notching it so I am going to put some coil over shocks to give it a but more help so doesnt...
Looks to be the same
Thats them but for that price I might as well just order the whole one on LMC .I was hoping the pins be like couple bucks each.Made a offer though...
Yeah and the wedge in tight so when you take them out they usually get damaged .
I need the highlighted green one in this pic .I guess its called lock pin but that such a vague name that tons of stuff comes up .My question is...
#4 is just the pin and my pins are perfect I just need the little one in pic#3 with the kit that the nut threads on to .
Its a little tapered bolt that holds the front of the rear leafs on the truck frame .I see the item it holds on is called rear spring eye pin but...
Its the little pin in the number #3 LMC picture that holds the spring eye pin in .
I am looking for those little set screw type bolts that hold in king pins for rear leafs .I am not sure what they are called or if they are sold...
I thought of that too but I have added a 10 bolt later rear and the shocks I am using are very small and they did not make the size I needed other...
I have a 56 chevy truck 1/2 ton and I want to stiffen the rear a bit and I was told I could use the 3/4 ton rear leafs in place of the 1/2 ton .Is...
Separate names with a comma.
The Jalopy Journal
