The Jalopy Journal
Looking for a way to leave my 32 trans and original rear mount and NOT chop up the crossmember and convert the drive shaft to an open style. Yes I...
It is hard to accurately measure but the top box looks right and 5 1/2 to 6in. machined edge to machined edge.
It is tough to get s pic now assembled. Again it seems like the snout is too short. I really have a lot of exhaust -manifold to steering box...
Building a traditional hot rod using the early F100 box. The original 32 steering box fits the firewall hole perfectly but the 1955 F100 is not....
I am leaving well enough alone. It runs and drives good. As noted above, the floor boards must be removed to see it and it is not worth the...
Your right ...I`m going to open a hack saw botique for you guys. I"ll sell model A hack saws. Model B saws as well as the model 18 saw (more...
I am new at total stock cars and have been listening to others preach about judging stds. That said it would make a lot more sense to correctly...
Did the search here about getting the numbers correct on a resto. The tranny for my 32 is the only thing that is in error. (replacement) Is it...
I recently purchased a very nice black 32 5 windo all steel car (glass rears) and had many folks admire the great red pinstripe and if I knew...
I am trying to sort out the many problems with a car I purchased and am having trouble with the back glass when rolling down.. The glass will...
Thanks to all. Greaat coupe Sloppy.
Thanks. Which panel are you talking about? I need a single lower left front quarter panel patch for a 5 windo. (just behind door). Years ago the...
Hi. I recall getting great 32 ford panels from a shop in Arkansas. Is he still around?
Seal off one of the carbs so no air or fuel can get in. I had the same problem of fouling with original 97`s and progressive linkage. I cured the...
I don`t exactly know what this black rubber u channel does. It obviously protects or seals the water tray to body just below the rear windo. Does...
Yes indeed and thanks for the codes.....Algomac I could take one of your shells and insert off your hands and do the tidy up business right here....
thanks
What is involved with getting an original 32 fuel gage to work. Maybe a look alike gage with a more modern sender......??? Thanks in advance
thanks to all
What is needed to let 35 ford wire wheels seat on an original 32 brake drum? Thanks
I am not finding the frame vin of a canada built car at the front body mount. help
Deuce.... the tube under the intake manifold is there. So vented I guess? The rear cap showed a brass endplay spacer without removing the cap....
Found these under intake on a 21 stud. I was hoping to see the LB but no. Right front to back: R18-87072. MCAL. S F B Left: 060 PS H, BSG,...
I know they call the grey on the 32 grille french grey but what is that color or if someone has a code? Thanks
After a search here, I think I decided on the the F100 (1954 box) for the duece and with a new end taper and threads I should be able to use the...
found.
Is the floor board battery access hole cover the same as a Model A? If anyone has an original 32 that they might part with or can get me a pic...
I looked at fort wayne clutch and same number for tractor and car. Thanks
Separate names with a comma.
The Jalopy Journal
