The Jalopy Journal
Thanks. Ebay has a lot of internals for the 4sp tranny right now. Way cheaper clusters, input shafts and gears as compared to the ol` 39 3 speeder...
Thanks. They were both interested in the actual tranny however. I need to look again but the tranny is behind a V8 so maybe there is no adapter...
Had a couple fellos show interest in a 33 ford truck tranny I have. What is the new interest in them?
On the way.
I have a shifter locking device for Ford floor shift trannys. It`s made by Hubbard Services, Chicago Ill. and Auto Lock on plate. I need a key and...
Yes lens repo or original differences.
How do you tell a repro 33-34 headlamp lens from an original. Do the repro have the McKee and Co. at circumference? Thanks
SS34 how come you don`t use a 33 spring? The curved spring would drop in the pocket better? I made the mistake years ago on first rod and trusted...
Nailhead and patmanta…..You mention "bolt the 33 drive shaft to the 40 banjo". Then I guess you would be adding spring mounts and 33 radius rods...
I appreciate all of the info. Makes sense. I wonder why then, that a casting hasn`t been developed for the back of the 39? Really this is all...
Sorry if this has been kicked about before. I have a 39 tranny and a 48 pickup tranny with the open drive line output shaft. I want to run an...
Thanks 302. I did a google and nothing except Mac`s and a few others are selling the snap ring. No mention of a tool. I remember being shown to...
I keep running into the strange angle cut ends on the snap rings on the bearings of ford flatty transmissions and wonder how everyone else removes...
Rebuilding a flatty tranny doing the later gear swap into the 78- case. I am in need of a 16 tooth input shaft and was wondering as I looked on...
Thanks. I was able to send it back and since found a good one. You find a few bad sellers on ebay. I was not able to leave feedback for him so...
Please let me know. jjccpedersen@charter.net
Thanks Wizard. I have the side shift trans on a bench and an extra set of 33 pedals. I laid them up in an aprox location and immediately see what...
darn that's perfect. It may be getting tougher for me to find that 41 only mast. I have a very stock 33 ford with the exception of a current...
Thanks. So I am now looking for a complete 51-52 F1 steering gear with column shift. About the only thing I will lose is the steering wheel...
I don`t recall ever seeing an F1 with 3 on the tree. I am looking for the box and column from an F1 and thought if I use a side shift tranny and...
Thanks for the great info. I think I want to use one of the el cheapo aluminum radiators from ebay and save the 33. I wonder if the 3 core china...
Using stock tranny and a transdapt to drop in a 64 283. Does the wishbones need to be split? Thanks
But did the SG 56 come with threads???
I guess heli coils would work but he said the threads looked good and even 1 of the three starter holes is stripped. My question is did they come...
I just received a used SpeedGems SG56 from an EBAY auction and found that all but 3 of the tranny holes are stripped of threads. I`ve done this...
Mark...Yes already had trans. Trans side mounts seem like a good idea...……..but then no rear crossmember?.....I don`t know if I want to dangle a...
Using original 55 front mounts and a tube style trans rear crossmember. The original drive shaft yoke bearing and seal surface is 3 3/4 so that is...
I am putting a TH350 into a 55 chev. with 327. I see that Speedway lists a separate drive shaft for the swap. I have the original drive shaft and...
Again thanks to both of you fellas. Charlies got some HD pedal brackets there that look fine. Also the same with SDROADSTER. The pedals look great...
Lots of great info here fellas. Thanks again. I imagined a 3 9/16 x 3 in stroke would make the A really fly, especially with factory balanced...
Separate names with a comma.
The Jalopy Journal
