The Jalopy Journal
Zoinks scoob! Yes, you can use tape for houses on cars, he's using it to protect edges and doesn't want anything to peel, read before posting please
You may need this ;) https://www.youtube.com/watch?v=fheERlqNzQA
You can de-mask as soon as the clear is dry enough to touch. You start sanding the clear as soon as it no longer fingerprints, it makes it a bit...
Put a dehumidifier inside the car and set it to run continuously
You completely missed my point, nice work
Why not ask the friend you bought it from to show you how to use it?
With the widest effing rods ever?
Nice to see another international hamber! Perhaps now you can see that not all Americans are idiots, just 95%!:D By the way, your english is...
Chem-Dip. End of story
Seeing all the Rhodies and other trees in your yard made me think you live in Washington! Looking good by the way
NASCAR runs mechanical fuel pumps to supply 850 hp
If you're having a problem with your tinting agents in your toners settling out you're putting it waaaaaaay too wet:D
The pattern changed halfway through 65, and remember, when it's easier, anyone can do it ;)
Unless your friend is a master, it is doubtful that he will be able to get consistent coverage spraying everything apart, especially in a tri-coat...
Never used them before, but maybe someone here will chip in about the little ball check valve bleeder screws. Just open, pump, close supposedly a...
Two door limo
A good "SOTP" way to tell is looking at your chips, if you are getting a bunch of small chips then you are probably drilling too fast. Ideally,...
I'm willing to bet anyone that does upholstery work on used cars isn't making the repair to last forever, rather than to get the car sold
I'd have to go with any Legos and Electronic Talking Battleship. Still have the battleship I got in 1989 when I was five, no missing parts
any bit you get at a home improvement store is going to be some chinese garbage made to add three cents to their bottom line. Go to a fastenal or...
1295,5 milímetros sob a "corcunda" em um 1950
Nice work, I like the use of the skateboard wheel on the bead roller. Are you using the clecos to hold that panel in place while you scribe the...
Please don't base anything with a 1.7 tip, you want a 1.3, 1.4 maximum for base coats, and the same for clears, with few exceptions. Primer guns...
Right up until the motor magnets come unglued from inside the pump! Seen it
Never heard of the company before, but at $55 it's probably not particularly spectacular, but should get the job done for primer. On that note, a...
I personally start in the center of the roof and work my way to the edge, this helps keep your arm out of it, at least for the first coat of...
x2!
I have a friend with an OT japanese car that's turbocharged. 301 at the wheels with 315 lb/ft of torque in a 2700 pound car, daily driven. Do...
I daily drive my Cyclone with a spool...quit worrying
Sit on someone's shoulders, done it!
Separate names with a comma.
The Jalopy Journal
