The Jalopy Journal
Check out the site recommended by High Class Rat. It will give you an idea/experiences from people who live in each area.
All that being said, I swapped Ford Electronic distributor into a 302 Ford & at highway speeds my engine was overheating. It turned out the...
Check with NAPA. They have the copper washers for the hose-fittings on a disc brake caliper. I believe they have an illustrated catalog page that...
We were told the same thing. The wires have to have some resistance.
Contact Rick Eskew phone 404-659-8722 or 800-462-0062 (Atlanta, GA) If he can not help you he will tell you what are your options. He has been in...
Now that I looked at your pictures I see the filler piece-nice work!!
When you cut the cowel to lean the windshield back-did you add a filler piece to the opening that was created? Just curious.
If you turn the bolt around & use the nut on the inside of the spindle would the head of the bolt cause the same problem?
I visited a shop here in Atlanta that had the blueprints of boosters from back in the '50s. They claimed to be able to fix any of them....
Thanks for the advise. I originally sent an email to the Jack Roush Racing asking the same question figuring they would be knowledgeable about the...
I have a Ford Positraction Rear Differential with the clutch plates. I may have it named incorrectly. I have purchased the Ford Racing Friction...
If I were to do this again I would contact Landrum Performance Springs. The address I have is as follows: 105 E Etna St. Mentone, IN 46539 phone...
I have a little over 11,000 miles on the EATON springs. They are showing some reverse arcing. According to my records the springs have settled...
I bought a set of EATON springs for my '40. I ordered springs to lower my '40 coupe which has the CE kit & springs. The CE supplied springs had...
I have a pair of Appliance Torque Thrust look alikes 7 X15 with a 3" backspace. Passenger car Ford bolt pattern. I bought them for my '40 & will...
I tied my engine down with a length of cable. The cable does not have to be anything special-the cable used on garage doors will work. I fastened...
I visited his business after the LA Roadster Show he was in good health-funny how life can mess up a fellow's lifestyle. Hopefully, someone will...
I seem to recall that someone said there was a shop in Cedartown, GA that has the ability to still do that work. I can not put my hands on where I...
It is probably going to sit so low no one will know.
I''ll be coming up Saturday morning along with a friend in his Flathead powered 32 Roadster. Three other friends who live nearby will be there, as...
A good kit is manufactured by TransGo. They don't do a lot of advertising & that keeps their price reasonable. I've used two of their kits in a...
I know a fellow bought a chassis from Honest Charley earlier in the year. I believe it was a Pete & Jakes chassis. They are in Chattanooga, TN.
Is there anything available that will seal a gas tank with today's gas? I understand the sloshing stuff would eventually come off & plug up the...
The magazine article that shows the installation by the Fat Fendered Street Rod Shop is Street Rodder August 1987 page 44.
The roadster was built by Scandinavin Street Rods when he was still in New Zeland for his brother in law. I believe I have my facts straight as I...
All this talk about battery location has me wondering about venting a battery. Mine is in a plastic case with a cover. The battery is in the trunk...
I called NAPA & they show zero stock. None of their Atlanta area stores have any in stock. He said he would call Echlin & see if they have a...
If you want to have the work done by a good shop check out:Lakeman Chassis, 343 East Santa Fe, Fullerton, CA. see Bud Another shop that does nice...
The plastic bushings for the stock weights are available from NAPA . The part number is ECH DP112. The plastic pieces the weights ride on are not...
My '40 has a louvered hood & I drove thru a good rain for 20 minutes south of Louisville Saturday morning. It was coming down in such a manner...
Separate names with a comma.
The Jalopy Journal
