The Jalopy Journal
Check your vacume source. You may have the vacume line hooked up to the wrong port
Not sure what happened so I'll try again
WJ in the early days. Same car both pictures, but 2 years and a full tube chassis later. Car ended up being sold to a street racer in Sweden if I...
More from Birky
Arnold Birky
James "Too Tall" Warren
Way back when, Local car guy went to church (imagine that) with his then current old lady. His hot rod was a 50's willys aero coupe with a...
HOTRODDONs response needs to be saved in the Tech archives. Good info for those of us who bleed blue
I used the cowl area from a 68 chevy to cover side markers
Ranchero was built on the station wagon platform. If you look in the bed you'll see a removable panel at the front of the bed, below the rear...
MCINK, these all look to be the yearly WCS meet at Marion. Am I correct?
Worked for a full service station in the early '70s. Owner insisted that we check the oil of every car driven by a woman that we knew wasn't a...
'35 Ford Cabriolet (Dad dated mom in one in the '40s. Even though Dad is gone, mom at 83 still has it and lets it get used for parades)
A tazer. The wife's poodle doesn't think much of it
I did this to my '68 GT/CS. one of the best modifications you can make. I used a ProMotor sports wedge kit that Doc Fromoder had gotten to do a...
If 2 wheels are allowed, count on me
Try these, '31 A pickup and a '72 vega from our shop
15 years ago I bought a 3 phase 13" swing WWII vintage LeBlonde for $200. My car buddies thought I was nuts. I changed over to single phase and...
Mine is a coats and I wouldn't use anything else
Pulled the dust cap on my MII front end. I'm using Granada rotors, and have 3 threads past the end of the nut/stamped castle cover
Great idea
If the shoes are properly arched (matched) to the drums I'd say it was possible. Arching shoes for passenger cars is a lost art. Nobody does it...
I CNC Plasma cut Intake flanges for both Desoto and early Chrysler hemis from 3/8 mild steel. Kind of a build your own setup. I've used Jap M/C...
Race TT at sturgis and RC back in the '60s with 441s. Now have a Kamamoto SX650 tracker in the collection that I take down every once in a while...
Nice day for a scooter ride, so I went. 500 miles round trip. I've got to agree with most, Was for the most part a few really nice cars and a few...
No matter where you go, there you are..... absolutly
Psst, mister ...can you spare a dime???
SS/Da would have been a hemi car
I use a Hypertherm powermax 1250 for my cnc table ...Love it. I had a Lincoln procut 55. I'd NEVER buy another Lincoln plasma cutter and would...
Flap wheels come in different configuration, flat and angled. If I am working rounded metal, the angled work best.For plain flat sheet metal the...
Separate names with a comma.
The Jalopy Journal
