The Jalopy Journal
Its not the drama, its the big question mark that leaves you hanging wondering why a thread is gone, and another thread remains. I'm left...
Since the previous thread got killed* before I could snag the frame dimensions image, whoever posted that frame drawing could you post that image...
The joys of leasing (renting) the land/building your buisness is on. There was a local place in a prime spot, unofficial local hangout, good...
I think its a molehill. Later model drums have "slop" in them around the studs, so its what I'd be basing it against. Ask yourself this, IF you...
Just for general fyi's: Two chevy flywheels exist, 153 tooth flywheel = straight across bolt pattern starter (block mounted), see above starter...
A variation of Manneken Pis, located in Brussels Belgium; http://en.wikipedia.org/wiki/Manneken_Pis Alex.
Haha! And to think if you had only started your hunt from the other side of the county you could have seen it from the dirt road in the back...
Another preference for the exhaust note here. Alex.
Agreed. Depending on your views as a driver one with your car, this movie will capture you. If your car is your appliance, then this movie will...
Buy the Chevy, since your in PA, keep the Jeep as a winter beater and salt catcher. Alex.
http://www.oldengine.org/unfaq/solenoid.htm
Just as a heads up, if you do elect to have it shipped directly to you, any shipping method (in general) will have at least a $50 brokerage fee...
Just for giggles, I punched in 1966 Corvette, 327cid, and came up with this from the Dorman catalog: p/n 674-500 (left side, square bracket) and...
Yes. HOWEVER, the starter you use is dependant on the flywheel you have. Large, 168 tooth flywheel = angle bolt starter. Small, 154 tooth...
If you like the style, why not? His money, his toys, no different than you or I but on a different scale. Know anyone that collects glassware?...
I love q-jets. The flack I got in highschool for refusing to go to the dark side of Holley was never ending. As others, it gave me a nice source...
Did you select the longer pushrod due to the aftermarket heads, or based on using a stock vortec head? Don't tighten your rockers down as much....
One thing that jumped out at me; running and instrument lights don't work. If it is like later model fords, those are fed from a wire coming off...
Man, glad Ted survived that one! Alex. Loooong time lurker at alt.autos.studebaker
RIP Andy. Alex.
I had a cooper do that back in august. Never seen anything like it, just blew apart (spare in the trunk of my DD). Alex. Its a conspiracy I...
Exactly. Build the car for you, not somebody else. Alex.
Maybe it was their anti-sticker statement. My 'modern' ford is filled with acdelco branded items and I leave them on there as my anti-sticker...
Theres still an idiot light (at least there used to be, check the owners manual) that will come on when the temperature hits 250ºF and the...
One caution with using 120 or 250v rated fuses in a car... They break their filaments easily. Found that out the hard way. Good thing I had the...
Too cool... go for it. One thing I'd like to know in advance first, since there are cars you love, and others you hate for no other reason than...
Insulators, mostly glass ones. Alex.
Sounds like the cable housing is getting jammed against the speedos rotating bits when tightened up. Get some narrow washers that have an ID that...
Nope. PDF x-ref here; http://www.accel-ignition.com/ProductsMinorListByMajorID.aspx?majID=575&BrandID=3&selection=6 Alex.
The guy that built my trans told me to go with a stand-alone cooler, even though its driven year round (below freezing temps). 8 years of abuse...
Separate names with a comma.
The Jalopy Journal
