The Jalopy Journal
There is a restrictor fitting on the partial flow early blocks it is a 90degreee fitting with a small inner diameter on the oil line that feeds...
I recently seen a comp cams roller cam for a Studebaker on ebay the may do it but im sure 7-800.00 ?????
1965 GTO 1953-4 STUDEBAKER { partial to it since I have one} 63-65 Riv 40 Ford coupe and of course 40-41 Willys Coupe
Hi from Allen Park Michigan
Put me in line for a hamb 4 speed knob!!!!!!
one thing good about a Stude v8 is they sound sweet through some blown out glass packs! they are a good mild v8 tend to have low oil pressure...
If you can get it to my area I can deliver it when I pick up the Stude body
heres the 32 bed pics
Id put a GTO hood on it and drive it everywhere!!!
Thanks, as always, I thought they were the same but had been a while Jerry
Hi Had a question asked by a friend, can a 57 Chevy truck cab be used in place of a 58? will the later sheetmetal/glass bolt to it? Thanks Jerry
breaker bar and tap the starter works best if possible. the crank bolt is torqued from the factory 150 lbs
I paid 250.00 for mine, it came with a Edelbrock dual quad and a steel 312 crank
Etch prime, epoxy prime, get rid of the old filler the new products are way better!
Big flake the roof/ astro supremes!!
usually the 17.5 wheels were a railroad company application, I believe they may still use that size??? tires should be available Jerry
Great coverage as always!!!
Studebaker started Chevy 283 In 1965 NO 4 speed cars though they did use borg warner 3 speeds which would allow you to use a b-w 4 speed
Well here it goes another project to compliment my fleet of projects,51 Stude Truck, 54 Stude Bonneville car,59 Chassis research FED, Now a 32...
4 doors werent cool parts cars at best , anything less than 400 cubes was not good for me, I owned 1 wagon, 66 Tempest was ok but not as...
Usually a sign of jumped timing in a gm {nylon teeh gone} replaced a ton of them back in the day! Jerry
Heres mine 51 Studebaker, natural fading and patina!
The packard tailamp assemblies fit the 56 chevy 1/4 panels like they were made for them My dad did a 56 Delray in 56 dont know exactly how...
Denise, Great coverage as always Rick is right I WILL NOT miss next year Jerry
Im going to start building my 200 mph car this spring, 54 stude coupe twin turbo {undisclosed engine} strong cage, tall gears and I figure...
Crower U-FAB n the box for a Studebaker V8 4 X 2 bbl
Heat riser on exhaust manifold ,spring is broke it flops at idle, steady at speed by exhaust flow
Big compression, the baddest sounding idle is from a roller cam !
Buy it premixed and dump it in no stirring needed
GM should have built them that way!
Separate names with a comma.
The Jalopy Journal
