The Jalopy Journal
I have a 351W and C4 in my 1939 Ford Coupe. Warmed up mild stock 1969 engine. 60k miles in my coupe - runs great. All and all - nice engine for...
I have an old 1962 Chevy Corvar scissor jack in the trunk of my 1939 Ford with a few 2x4's - in 25 years and 60,000 miles of driving - only needed...
Vern's book due in from Amazon - Thanks.
My garage now - stuffed full of '39s and '40 Fords.
Thanks guys - I plan on ordering Verns books on the original rear and the steering.
I have a 1939 Ford Coupe - original steering box and column. Car has a 327 Chevy installed in the mid 1960's and I want to keep the car period...
Sounds good - I will give this a try.
I had a set of Honest Charlie front mounts on my 327 in a 1939 Ford w/ Muncie 4 speed. I first changed out to new OEM rubber mounts. When you...
I have a 300 hp 327 in a 1939 Ford Coupe - Muncie 4 speed and for now, original steering box and column. This car did have the 2 inch Chevy truck...
Bummer - really cool look on a black 40. Thanks any way.
I really like the wheel comb on your 40. Please give details - rims, hub caps and beauty rings - thanks.
Thanks for the detailed help. I have wired a few street rods - but did the premade fuss panel and typical GM column, GM light switch - and follow...
Thanks for the part #'s - SS587 is single pole starter sin. and HR-117 is for horn relay - I like this set up - any basic wiring diagram would...
I do not really have any wiring on this car - just straight wired to crank it. Is a 1970's ford starter solenoid good to use? I was going to...
Sounds like a simple question - but will the START push button that was original to a 1939 Ford in the dash - function well for a new 12V wiring...
I need to replace the z bar on my 1939 Ford with Muncie 4 speed and 327 Sent from my iPhone using The H.A.M.B. mobile app
Looks cool - I am working on its twin that was my Dad's 1960's Hot Rod. [ATTACH]
I have bought floor patches from Paul Bradley off and on for 20 years. Always had good and prompt service. A few days before the Fall Auto Fare...
I know it has been a while since your cable post. I am needing to adapt a Muncie 4 speed behind a 327 in a old school 1939 Ford. It has the zbar...
Thanks for the response - I did not think of using the cross shaft - it is missing from this 1939 Ford - I will look in the spare parts boxes for...
I have a 1939 Ford from my Dad - 327 Chevy and Muncie 4 speed with z bar clutch - 1940 petals and stock steering. The exhausted head pipes are...
I have original 1939 bumpers on my convertible from Bumper boys - just swapped out cores in Charlotte Auto Fair about 15 years ago - OK quality...
I have the C/E kit under both of my 1939 Fords - they have stock chassis. I used the 1957 Ford 9 inch rear - but Ford or Chevy gear should not...
I have my Dad's old 50's hot rod 39 Ford Coupe. it has a Columbia w 4.44 gears - open drive line to a Muncie 4 speed and 327. Never had the...
about 15 years ago - I took a rough 1939 Std Coupe - cut the cowl at the windshield post - and changed out the roll out windshield to a 1940....
Sanderson makes some shortie headers that only extend 4 inches down and another set swept forward on driver side to clear steering box - but...
getting started on my Dad's 1939. Has 327 and Muncie 4 speed with Columbia 2 speed. Does your block hugger headers clear the stock steering box...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] A project of mine started about 10 years ago. 1940 Ford Deluxe Coupe....
Really nice 39 Sent from my iPhone using The H.A.M.B. mobile app
Very cool project - get it road worthy and drive it .
Separate names with a comma.
The Jalopy Journal
