The Jalopy Journal
Hey, guys, so I have had my 55 GMC for a few years now and really enjoy it, I do not drive it that far, but it is a lot of fun to just go short...
So without fail, it has been almost a year after rebuilding the motor we took it on a trip to AZ and back and after getting back I noticed again...
You are correct, I am going to tackle it tomorrow, so I will report back here and let you know what I find. The floats are metal and I don't...
The top of the carb is really tight, I did replace the gasket between the sections but that should not even have fuel from the bowl rising that...
There is a simple inline fuel filter before the fuel pump, which is mechanical. The fuel filter looks to be good.
On my wives 66 C10 I have run into a bit of a roadblock and I am not quite sure what the issue is, so I figured I would post up and see if anyone...
Yea the rear isnt really the problem, the running lights dont turn off, the brake light positive side is grounded the horn doesnt work if the...
Hey guys, anybody have any idea where I an get a premade wire harness for an econoline van 61-67 specifically a 63...The one that my van came with...
Thanks guys, hitting up the napco forum may not be a bad idea
Bummer I was hoping somebody would have some good information
Hey guys about a year ago I purchased a 55 GMC, and the truck came with dealer badges on the side where it would normalled say GMC...
Thats great
Thanks, I already have a stock one and an offenhauser and an edelbrock, just need carbs now
Some very good info here, I think I have gotten the info I was looking for, which is yes I can do the tri-power on the 316 and I can go a few...
This is something I had not considered, but what I am gathering from some of the replies is that I am going to decide between a beefy cam or the...
Hey guys, so forgive me for my lack of knowledge here, but I am having a little bit of a hard time figuring out some things. First off I have a...
Thanks guys, I am going to hit up a few of these guys
I am looking to have a complete car media blasted, I was wondering if anybody knew any good places in socal, preferably closer to Burbank that can...
Way cool though
Not sure the gasket was seriously destroyed right through the coolant passage on the head, if the issue continues then your right I will be pretty...
Alright guys a couple of new questions... Pulled the head and found a large compromise in the head gasket. Also had the block and head tested...
There was no coolant in the oil, i have drained it completely and there was a ton of oil in the coolant and no coolant in the oil, im pulling the...
Yea im really worried about finding out the block is cracked somewhere, I am going to pull it over the holidays and see what I find, thanks guys
Not auto, manual 3spd
Ok so it could still be, thats what i was thinking
Alright guys, im officially stumped, the other day my 66 chevy c10 sportin a 262 straight six started whistling while driving, sometimes a little...
Oh wow, your right, for some reason mine was actually installed backwords without the clamp, thanks for the info
I am having trouble figuring out what the threaded hole on the front of the thermostat housing on my 292 chevy i6, I am going to replace my...
Hmm i looked at egge and couldn't find one for the 316, I'll check the others
Separate names with a comma.
The Jalopy Journal
