The Jalopy Journal
I can't answer your question, but on my 8n, I get all of my parts from the Ford Tractor dealer. The generic Tractor Supply type places sell low...
Ignorant. If you cared to actually learn anything, you'd know that Plomb tools developed the combination open/ box end wrench that we all know...
You need to mask where the seat post goes into the frame, and where any bearing cups for the cranks and forks go.
Eastwood is mail order only. Not sold in stores.
Powder By The Pound has a massive selection of powder and it happy to sell small quantities to the little guy.
I started out with a cheap Eastwood gun. They work fine for a home guy with an old kitchen oven to do small parts. You aren't going to make a...
Paint stripper it yourself to get a bulk of the buildup off. The less blasting your coater does, the lower your final price.
You just described my 327. Goodwrench 4 bolt 350 block, large journal 327 crank, Scat rods, even the C3Bx intake. I'm running Dart heads and a...
Yep, same here. If you bring a part to me to coat, I always blast it myself regardless of whether you did or not. I find myself to be more...
I have all I need in my life. More money wouldn't improve my life in any meaningful way. Houses and cars and boats don't mean a damn thing to me....
This is the kind of Model A sedan the HAMB is about. New guys need to understand folks who have been on here longer understand the purpose of the...
I just searched Summit and they have pages of mechanical fuel pumps for SBC that put out 7 psi or less and are clockable as needed to get the...
I figured since he told what engine he meant a mechanical pump.
Any generic parts store replacement should fill your need.
Here it is online... http://www2.tech.purdue.edu/at/courses/at308/Technical_Links/Ac43-13-1B/CH11_12.pdf
I learned it in A&P school. There is a book called the AC43-13 that covers all aircraft repair. I'm trying to find it online to reference for you.
I've done it on a lot of planes, but prefer the old style tube wire loom for cars.
I was a level 7 post office mechanic for 7 years. I definitely know my way around LLVs. It's a good job, as good as any job spinning wrenches...
Even that has changed in this economy. The 798 has a list hundreds long of guys on the roll waiting for a job. My town is full of 798 guys with no...
It would be hard for me to recommend welding as a career to anyone right now. In my area, we had a huge oil boom for the last few years which went...
I disassemble them and coat all pieces separately to get good coverage in all areas. [IMG]
His first post and he is exactly right. It's easier to walk through the yard and look at the glove box stickers than get underneath every one to...
[IMG]
Not a 52 Chevy in that picture . Typo ?
Yes. When I was working as an A&P, every man in the hanger had his own little bullet heater. When we needed fuel for one, we just popped the lid...
There's your power steering too if you need it. As well as front disc brakes if you want the 5 lug pattern. Front sway bar too. I put pretty...
Had you been swimming in cold water or something ? (Just kidding with you)
I don't have your answer, but that's called track width.
Total Performance is no more. They got bought up by Speedway. To the OP, Speedway can sell you any and all things you need to build a bucket....
I buy Naptha at my local Tractor Supply. If you close the lid on the washer when not using it, it last a looong time. Otherwise it evaporates on you.
Separate names with a comma.
The Jalopy Journal
