The Jalopy Journal
I'm interested in the posi. Man, it looks new, this is better than the lottery !!
Originally Posted by RAY With [IMG] Your set up will work only after you change out the black retainer strap to Red to match the other side and...
The registration area for the event is seperate from the swap meet. Registration is at Papa John's Stadium and the swap meet is on a first...
Experience is a hard teacher....It gives the test first and the lesson second. I think what is being said is, start with what fits your...
39 All Ford, You sure that was not the small end that came back with the cooper color? It is a common thing for the rod to take a cooper color on...
I haven't been on this site in a while but it is full of pictures of Drag Racing, There some picx of Caddo, Green valley and other Texas...
Squirrell , 39 All Ford, YA'II are not alone and I realized that this was an old post but I kept reading because I started thinking maybe the...
What Rich said is right and make note that towing with a strap or chain is illegal in many states and requires a good and working brake system.If...
I have actually seen a 20 degree drop in temp. with water wetter. Antifreeze raises the boiling point of water but will not reduce engine...
Yes the Germans used Phosgene Gas in WWI. It's use was outlawed as a military weapon in the "Third Geneva convention" in 1925. My grandfather was...
What Snarl said is RIGHT -ON and I agree with him on the choice of the 46-48 W-1's.
Put 50/50 antifreeze in it and a good pressure cap. Never run just straight water.Antifreeze is more than a freeze protector. Water boils at 212...
My first thought was, none of my welders(tig/mig) seem to weld right around magnets. It never seemed to effect the stick machines but whose going...
Where is the master cylinder mounted? On the firewall or under the floor board? If is is under the floor board, You need to install a 2psi...
Check the front wheel bearings for proper adjustment, If you have never adjusted the bearings on disc brakes you may have them too loose. If you...
Like Squablow said if it is a 3- speed or overdrive 3-speed ok but fluid drives are a pain and near imposssible to get parts for. I personally...
send me a couple of them ... I'll let you know how they work:D I have been want to build a notcher that uses the Roto Broach mentioned but you...
Hotroddon beat me to the draw
Don't do it. Here is a link that has been posted here before that explains the pros and cons. I personally like the old 3 wire alternators better....
Anybody got some input here??
Bart,Thanks for a good time. Really fun meeting new people and actually putting a face with people your talking to here on the Internet. Good to...
Try another gauge and get a comparison.If it is an electric gauge check Charging output.An over-charging altenator could cause high system voltage...
I was just wondering if anybody was interested in showing their technique or Ideas on rolling new spring eyes from scratch. Thanks , Paul
Really looks great ! Gives the car a lot of character.
Bet its not a rear main seal leaking. Check the back of the intake manifold for leaks. If the intake is installed with the rubber seals front and...
I think everything has been coverd and you are to be commended on the way you handled everthing but if you want him to do the work, backoff(...
Thats not as bad a deal as you may think.I think almost every thing I ever learned to do with auto motive, I learned how to do it after I got the...
Acually a lot of the older Commerical car transport Haulers were tag-a-long traillers.The were just built heavy duty and used heavy duty trucks....
Overall hieght could have been a problem but both cars appear to be light so I doubt you over loaded the trailer. If the trailer was not over...
Rich what about George Fields(cool Guy) Fiat?? Goes plenty fast . Wonder how aerodynamic It is?Your avatar reminds me of his Car.
Separate names with a comma.