The Jalopy Journal
trying to get back at it... got other non-Hamb projects taking up my free time :( started this tonight; [ATTACH]
It was sunny and not freezing out today, so rolled it out for first time and let run awhile/start stop etc... still got plenty to do, but can kind...
Thanks, I see you've made a lot of progress yourself... I got it more that "cranking" too. After rotating cam (and resetting ignition timing)...
Finally 1 step forward... :) I was able to remove the 3 bolts from camshaft gear and rotate cam 120 degrees counter clockwise, (same as rotating...
Short answer is I didn't. But as with tapping of rocker studs I put grease on the cutting edge to catch as much metal as I could. I was carful...
LOL, no you couldn't hear it even if you were in my garage. :( I really wanna have ready for driving this spring...(but without an interior) So...
Got all the studs replaced with screw in, and while doing I notice a problem. Many of the pushrods were rubbing on the valve cover spacer....
I did tonight, not all studs have moved, also all pushrods are undamaged To my surprise antifreeze came out of first stud I removed, so I moved...
97; thanks for the replies and info about studs, what do you think about the ones below? I ordered these screw in studs that don't require the...
was very carefully adjusting rocker arms today, but something just wasn't going right. after I'd crank engine (ignition off) and go back around...
thanks to all for ideas/support... I got to talk with and engine builder friend today and told him my story. He's 99% sure I collapsed the...
Separate names with a comma.
The Jalopy Journal
