The Jalopy Journal
And again if you do not have components to take advantage of this extra lift then your efforts were futile at best. i.e. non stock heads, upgraded...
Duration makes the power. Not lift. If this is a used engine with miles on it, you are asking for it to go boom. 1.5 is stock. 1.6 with .500 lift...
Looks like the original boat windshield to me.
So, do you think this goes towards his posts??
I just shit myself.
Would you like to clarify for us who is wrong and who is right?
Ok I did a little work and came up with this. 409 cu inch, max rpm 5000, Volumetric efficiency 85% (being very,very generous) Manifold...
At idle yes.. A little throttle ...no. Google a volumetric efficiency formula and figure out the rest. Don't do it the heads will not like it and...
Eric I'll help you out for the Olds molds. Shit get each guy on here to donate a $1.00 and no one could out bid us.
Found this email this posting to a friend denver craigslist > auto parts please flag with care: miscategorized prohibited spam/overpost best...
Idfk>
Take your time and build a real skin for it. That and the safety issues would make this thing look kick ass. Good luck!!!
Why don't you just get rid of the whole car, that will do it! I'll come get it.. No thanks is necessary. Doing things like that for people is...
I would be more afraid of that China box tube it is sitting on then it coming apart
email this posting to a friend denver craigslist > auto parts please flag with care: miscategorized prohibited spam/overpost best of...
Hey Eric I got a 31 Chevy pickup Hood that just might look good on that thing. Give me a PM if interested.
Ryan, at the 3:00-3:03 mark on the trailer there is a seems to be blue T roadster do you have any info on it. If the car is from Kansas area I...
Look at Dyers like said before Bill was going to make me a full set of V-belt pulleys but then I found a Delta drive, a Isky drive, and a Cragar...
Just thought someone could use this. email this posting to a friend denver craigslist > auto parts please flag with care: miscategorized...
I have a trans adapt adapter to put either a chevy early 3 spd or a later 4 spd. If you find out this is the route you are going to go give me a...
I agree with DrJ on this one I used a 56 olds lever type switch on mine from NAPA you could adapt it to almost any application I think mine was...
I guess I lucked out. My insurance guy is a car guy. He was happy I went with state farm instead of others that have been mentioned here before....
Not for the faint at heart but Google carbon arc that is how they welded sheet metal for years in the manuf. industries. I have done it my Dad is...
Ok I just went out and looked again and I also put some manifold gaskets in and yes I have a little bit of gasket sticking out of the top of the...
Yes it fits just like it should the runners are aligned and the bolt holes are dead nuts. The intake I have has individual runners.I know the...
More info? I have a 55 324 in the garage with # 8 heads on it. I too have a 2x2 Edmunds intake with the same 49-53 cast on the bottom but when I...
http://www.bandimere.com/ Is as we speek changing the whole track to concrete 1/4 mile. They are also running heating and cooling lines the whole...
I have the same set up. Except the one I have has no advance built into the base. Instead the one on my shelf has weights in the base. Same box...
Next time get some of those loads they put in the money or at the pawn shop you know the blue ink shit. Wire that shit to your car. Just remember...
If you look on Mondello's web site you will see a lot of interesting info on Oldsmobile oiling. Granted it mostly pertains to the mid 60's engines...
Separate names with a comma.
The Jalopy Journal
