The Jalopy Journal
[ATTACH] [ATTACH] [ATTACH] Here's two pics of a Speedway sprint car style wheel I wrapped with leather from JoAnn Fabrics. About to do the other...
Hi, folks. 1954 331 4 bbl on my run stand. While I tap the holes on the crank flange I thought I would ask what y'all are using for lower radiator...
Thanks, Gary! I'm shopping for a bandsaw now!! Sent from my SM-G986U using The H.A.M.B. mobile app
These are Sanderson headers for a Dodge hemi, modified by Sanderson to accept poly flanges I sent them. Don't make the same mistake I did and not...
Hey, folks....doing another Dodge and 2 ideas I can't stop thinking about: If you want to run a Chevy water pump, there are few (none, afaik)...
You are my hero! I am blaming Gary (73RR) for my Poly fascination....pics of the 270 he built in my wife's 1952 Willys wagon attached. Also, the...
I have had the privilege of running a T6060 behind an angry 528 Hemi ...now I am running a Tremec 5speed behind a 392. Took it on Power Tour last...
Old thread but I wanted to share some experience: Dodge trucks are particularly vulnerable to problems associated with "all the current through...
I know you are looking for more of a slammed look but my 1936 1.5 ton is getting a quickchange, hemi, disc brakes but it will ride high. The...
I totally support building a hot rod around a Tonner platform. Bruce Schneider built me a dually quick change and I am using a truck 331 Hemi &...
It's a great idea. Do you know the application that idler is from? Sent from my SM-G892A using The H.A.M.B. mobile app
The large pulley on driver's side....is that a power steering pump? Sent from my SM-G892A using The H.A.M.B. mobile app
I'm already complaining about Hot Heads brackets for a 270 Dodge in another thread [emoji13] [emoji12] [emoji13] [emoji12] Sent from my SM-G892A...
They sure look nice. What about your alternator mount? I found a P/S pump like the one you show in that pic and I need to move my charging system...
P-N-B; did you build those headers? Looking for a set with similar characteristics Sent from my SM-G892A using The H.A.M.B. mobile app
Well....we keep trying. This set from Patriot hits the starter. I basically need a block hugger with offset collector. Pics show yellow box where...
Any 1st-gen Hemi trans adapter works on this block so I used a readily-available Hemi-to-GM adapter. Also, don't forget to check in with the...
More progress but I still hate this alternator mount[ATTACH] Sent from my SM-G892A using The H.A.M.B. mobile app
Intake back on. Distributor is in! Sort of. This is a 440 housing. Small block distributor vacuum advance is on the other side. Pulls opposite...
I would love to run something like that but from my understanding, they have to be cooled... they are used to being cooled by lake water!
We ordered LS manifolds & Hemi flanges from Patriot because they have a "tight tuck" piece which has rear dump & is tight to the engine. Here is a...
Getting closer but the Hot Heads accessory brackets are not the look I wanted. Stuck with them because I need A/C and P/S. This is gonna be the...
[ATTACH] [ATTACH] [ATTACH] Hi, Folks... I thought I was in the home stretch on my hemi-powered project, a 1965 Dodge D100 with a 1958 392 Hemi &...
In the Mopar small block world, there is a Hot Rod Magazine article which supports your experience. Steve Dulcich made over 600hp out of a little...
I know this is an old thread but my 270 Poly (with side engine mounts) is about to be fired up for the 1st time soon. @73RR did all the hard work...
I like that color Sent from my SM-G892A using The H.A.M.B. mobile app
What's the story on that truck? Got any more pics? Sent from my SM-G892A using The H.A.M.B. mobile app
1958 392 Hemi in a '65 Dodge push truck[IMG] Sent from my SM-G892A using The H.A.M.B. mobile app
If you do another 392, the manifolds used when they put Hemi engines in trucks are much like the units you used. Much higher flow and can be found...
Ed Roth Trike.... painted by Watkins BOYS in Kalkaska, MI [IMG][IMG] Sent from my SM-G892A using The H.A.M.B. mobile app
Separate names with a comma.
The Jalopy Journal
