The Jalopy Journal
Dick, I have not had a chance to reply but have looked at your post several times, from work. Thank you very much.
I have an under-slung suspension that utilizes torsion bars, torsion arms, and adjustable spring perches run upside down. After getting it all...
How much did it cost to get them drilled? Thanks
Thank you for the replies. However, I put the cart before the horse on this one. I need to from 6 to 5 lugs. Got the Pro-e out last night and it...
I need to change the lug bolt pattern on a Dana 60. Can anyone suggest a good reliable machine shop to do this near the Joplin, MO area? If you...
Sorry, I meant where it pushes and pulls north to south on a solid axle set up. However, not like cowel steering, but down at the frame. Thanks
Does anyone have pictures of a standard Saginaw 525 box being used in a mustang style set up? Thanks
If you can post some good pictures there are a lot of smart people (not me) on here that will figure something out.
http://www.droppedaxles.com/ Use these guys. You won't be sorry. Shipping won't be that much. They're great!
What about just running the two outside links and using a bell crank type set up on the chassis end with coilover that you could hide.? Rough...
I'm just bumping this because it was posted so early . I watched it again, and I really think people on here will like it, even though the car is OT.
http://video.kenblockracing.com/flash/player/index.php?vendor_id=204&video_id=9183 <?xml:namespace prefix = o ns =...
He's awesome!
I have another question: I need to put some water lines permanently in/on my chassis. If I used regular HREW tubing would the antifreeze keep it...
This is good advise
I teach 6th grade, but used to coach high school kids. Teaching is very rewarding if you come in knowing you're not their friend, but also that...
Thank you very much for all the pictures to reference.
This sort of thing may not even exist. However, If anyone has built or seen a Model A Roadster Tub sitting ON Top of the rails as opposed to over...
I Tig welded a bunch of tubing joints in a cage that is part of my chassis. I liked being able to see the puddle and make sure everything was...
I figured this was wrong. I know electrics are known for their torque. I think that number is almost instantaneous isn't it?
Where do you look for electic engines like that? I've thought about doing something electric one day, but have no idea where to begin with the...
Thank you very much. You continue to be one the most knowledgeable and helpful people on this board.
Would anyone know, approximately, how far to the side a Gennie Tail mount shifter needs room to swing when moving in and out of the gate? Im...
I ordered a really fancy one from Howell. It easily got a leak, and then ran so hot I had to stop the car , the leak was spewing forth, and fluid...
It's pretty awsome when you use the trig to figure cuts and everything fits when it's mocked up. Saves a lot of time, and can be done outside of...
I'll try to find a gasket. Thanks
I'm looking for a cad drawing of a DANA 60 Differential Cover. I need to have a heavy flange cut on either a water jet or laser machine. I'm...
Awesome!
If you could find 1" x 7/8" or 2" x 7/8" or 7/8" x 1/2" you'd be set with some welding. Dividing up the 1 3/4" is the hardest part. 7/8" can...
Separate names with a comma.
The Jalopy Journal
