The Jalopy Journal
Painted the heater box [ATTACH] [ATTACH] Installed with a new plenum and defrost ducting. Also had to move my harness up from where it is in...
Yea i did slice the new bushings. Most bushings ive come across for swaybars have slices so i figured what the hell. I didnt see a way to get them...
Far from a legit pinstriper haha. I need way more practice, i do it just enough to get by when i need to hahah. But thanks Sent from my iPhone...
Thanks for the kind words.... Some updates. Pass side window is in and working great. Also lubed up the rear regulators and all is smooth. When i...
Thanks marcus! I just started messin around with photography like 7 or 8 months ago. Trying to learn from a good buddy of mine Sent from my...
Not a ton of progress with the holiday this weekend. Did manage to get the old windshield pulled and theres no rust in the windshield frame area...
Thanks man ! Sent from my iPhone using H.A.M.B.
Sorry guys for the slow updates. Went to cruise week in ocean city md a few weeks back, did an air ride install last week and currently looking...
Couple interior pics of the EZboy stuff i got. Brown pleats, white outers with gold piping [ATTACH] Covers sitting in the car to give an idea...
Forgot to post pics but i engine turned the gauge panel last week. Layed out a grid to stay in line... [ATTACH] 1/2 cratex stick to turn it...
New fuel pumps on the way as well as fuel and brake line. Waiting for the interior to show up so i can start painting the dash etc..... I got the...
Thanks voodoo Ok so next question about the fuel pump. The original one i took off with the glass bowl, in the right of the pic, was mounted so...
Need some fuel pump help. Are 239's different fuel pumps than the bigger y's? You can see the difference in angle on the pump arm between the old...
Updates. I used a model a shifter boot as sort of an inner dust shield thatll be inside the shift boot i end up making later on. I ended up just...
Well, yet another bad dennis carpenter product. New cowl to hood seal, the tac nails that came with the new rubber were about 2 sizes too small...
Few things, this car has been quite the challenge in unexpected areas. I dont show brand favoritism at all, ive owned many cars of many brands....
Well the dennis carpenter engine mounts i got set the motor about 3/8" forward of the old ones so ill have to pull them and well out the mount...
Got the trans back in. The tailshaft seems really tight to turn when the trans and clutch and all is installed. Is this normal ?? It goes into...
Got the engine back in.... [ATTACH] [ATTACH] Flywheel and clutch on [ATTACH] Trans adapter and bellhousing ready [ATTACH] Cleaned up the...
Couple updates. Heres the column and column drop with the shifter tube shaved... [ATTACH] [ATTACH] I ended up welding the upper half of the...
I read the directions that came with the drop spindle/disc conversion and it stated that there was a spacer needed there with those spindles so i...
The nut tightens down exactly to where it should and allows the cotter pin to slide in. I also compared it to the stock ball joint and it is the...
Thats as far down on the lower ball joint shaft as the spindle will go. Also, the cotter pins fit in both the upper and lower castle nuts...
Got the bushings in, major pain in the rump but there in. Suspension is going back together, control arms in, new shocks, swaybar bushings and...
Anyone else done these bushings? Heat necessary? Sent from my iPhone using The H.A.M.B. mobile app
Separate names with a comma.
The Jalopy Journal
