The Jalopy Journal
Fantastic selection of rods - Thanks for sharing.
There's gotta be more on this board than me who remember him in Maywood & seeing him driving his creations down Slauson Blvd.
I can't wait to see these photos. They gotta be good!
Thank you for sharing the great collection of photos you took. The variety is fantastic! And the close details you shoot are just awesome.
San Diego Roadster Club members may know something of it. They have been around many years, active in lakes & Bonneville racing.
AND, then you will find that the full-flow filter you just added actually reduces the oil pressure available to your motor. Remember, a filter is...
The inline Chevys that used a shaft mounted rocker barely dripped oil. And, the oil pump put out very low pressure. With the start of the 230,...
I'd just make a test run with it as is, & go from there if any change is desired. No way to know where the factory set the starting point.
Any way you can put step #1 in terms a non computer old fart might understand?
A great variety & excellent photos. Thanks for sharing.
The last couple days I've had to log in on every visit here. I always check the 'remember me' box but it forgets me I guess. Ha Ha. Great site,...
I always enjoy seeing the places you visit & what is to be found there. Thank you for sharing.
I run a inline 292 in my daily driver "55 Chevy. To position it I slid a piece of cardboard box (figure 1/4") between the firewall & motor. When...
Thanks for the tip, Bubba. Doug
Bubba- So if on my 292" six cyl. motor, if I was to use a MSD distributor & 6A box, would your 2.0 ohm coil & a 1.4 ohm resistor be the right...
Excellent ! Thanks for sharing.
A couple jumper wires, one to the coil & other momenterily to the starter relay will fix a lot of problems.....on a good day. Wish I was closer.
Mazooma - I remember seeing a flyer for the run I went on in Antique Automotive in Rosemead, Gene Scott's if I remember right. I was not in or...
[IMG] I remember this one well. Around 1970 I was driving my '40 coupe out to a gathering in Palm Springs. Going out I-10 getting close to there...
Great shots, Toby. Thanks for sharing. The trailers & push vehicles are every bit as interesting too.
A super slideshow - Thanks Enjoyed the hood ornament details
I think you want HAMB member 'carbking'. http://www.thecarburetorshop.com/
A great final tribute you all gave your friend. Everyone should be so blessed. Looks like the VFW and American Legion both particpated also....
Thanks for sharing your fine pictures with us.
Now thats some good info there, Chief.
You're correct, it will work better if the arms & rods are at right angles to ea. other' The Zbar shaft should be at 90deg. to the frame & level...
Thank you for taking the time & effort to share these beautiful pictures.
There are some pics of the ones I built for the inline 292 in my '55 BelAir here. http://www.picturetrail.com/sfx/album/view/8065277
Right here... http://www.jalopyjournal.com/forum/showthread.php?t=619433
Check this out for a narrowing job. http://2loose.chevytalk.org/55straightaxle2.html
Separate names with a comma.
The Jalopy Journal
