The Jalopy Journal
OT much? :mamoru: at exact post.
yeah, I need that, like I need the black plague!
I'm 21, and here is my (bone stock) lincoln cosmo. Owned it for about 4 months now. [IMG] [IMG] [IMG]
i've got to go and pull it and re-test. I had it at an automotive electrical shop, and the guy told me that it didn't work on my original bench...
good, I have 5.98v on the 6v batt in the car, and i have tested it with a good 12v batt as well.
I am not sure what you mean when you say they wired it incorrectly. there is only one stud that connects to the field coils, then to the insulated...
yeah, brushes were worn a lot. I took the armature to a shop to be turned and checked on a growler, and bought and installed new brushes, now the...
I was met with a wonderful surprise today after work when my 51 lincoln wouldn't start. I diagnosed the problem and narrowed it down to the...
one of those fit a 51 lincoln?
here's my old S-10 [IMG] and the new daily: [IMG] [IMG]
anybody know of a WWW radial that has the right "pie cut" edges, I am also looking to replace my OOOOOOLLLLLDDDDD bias plys.
thanks for the replies guys. I'll get to topping that off.
I think i will use dex, that is what it appears to have in it. does not look burnt either. I know that the trans was rebuilt in 02?
I have one in my DD lincoln, i know that the truck has a stick, but for the lincoln, they used a GM Hydra-matic. mine is 3spd with OD.
hello guys, i was poking around under the carpet on my ride and found the trans dipstick. Looks like the oil is a bit low, what fluid would you...
I saw a beautiful 59 hardtop mercury wagon tonight, 4-door, no pillars between the doors and only a power rear window. Owner is part of the...
cool stuff, nothing like that near here
cool, thanks! by the way, that's a bitchin olds.
Does anyone know if a fulton visor will work on a non split window car? Most of them that I have seen use a mount that attatches to the center...
well, i have a few things that cannot be converted, heater blower, hydraulic pump and solenoids, and guages. BTW, hydrualics are for the windows
hello, I am re-wiring my 51 lincoln, i am going to use a universal 20 circut harness, i would like good quality and a fuse block that will allow...
it's essentially a crankcase breather if i am not mistaken. probably good to keep it, or relocate it.
do I see a 337?
that would mean that the engine was 100% efficient. Highly doubtful.
o'reilly's eh? i'll have to look into that. as for that other filter posted, mine is not so much tall as larger diameter and only slightly taller...
hey folks, I was wondering where all of you guys are getting your flathead oil filters. i just changed mine yesterday, and the one i got from...
other than making all of the original stuff work again, nothing. don't tell anyone, but it is a photoshop drop. as soon as i can i am going to...
here' mine. the guy at the del taco called it a bomb. got me. [IMG] great pictures by the way.
this is something i fear most. Coming outside in the morning to see that some bastard has pried a piece of my trim off with a screwdriver....
look at human nature in action. here you have a lot of people with the same ideas, and the same hobby, and still you will find divisions. what I...
Separate names with a comma.
The Jalopy Journal
