The Jalopy Journal
SWMBO - she who must be obeyed
There are different classes of thread fits. What Ford used was a tighter fit class and you probably won't find a tap like that. So... Don't...
Whilst you're fixing things, maybe remove those dumbass tailights.
I've been getting your vision since many posts ago. Me likey!
The old timer I always listened to said that the tapered axles needed to be lapped to the hubs with OIL based lapping compound. I'll let you know...
Were ladie's tits really that pointy 60+ years ago? Maybe it is an optical delusion? [IMG]
Well sheet. you have the engine, fill it up and you'll know how many qts in the block. easy peasy?
Use and impact gun or stick a screwdriver in the teeth of the flywheel.
I have a 52 Ford F-1 and I want to modify a second speedo into a tach. I think I have the mechanics worked out to convert the speedo, so somebody...
rockauto.com
only the high dollar heater had that. the regular heater did not. ask the question on the ford truck sight? www.ford-trucks.com\forums\forum41
bubba, you got the math assbackwards. it is 14 volts divided by 1.3 ohms.
I remember the nut I bought as 1" 14 tpi.
chip wtf is an otter pop?
Yup. X2
If you're that worried, put the tank IN the bed. Not under it. I am leaving mine it the cab where Henry put it.
Just take 1/2 of the pistons out of the 390?
We used Explorer 8.8 on top of stock springs and c notch on frame. We used Exp u bolt, narrowed the bottom Exp plates and Moroso plates like...
Use Elmer's white glue on the drill bit. This works for drilling springs
Use two hammers to knock balljoints and tierods loose by pounding side of tapered hole Drill holes in leaf springs with a regular bit using...
Try ur local big truck spring shop?
How much trans fluid pressure are we talking about here?
I am very f' ing impressed!
Ah so, wise ones. I am now not confused at all and I thank you all.
I'm and old guy so cut me some slack on this question. I see references in threads that mention to apply sealer over primer before the top...
Now all you need to do is put the tie rod back behind the axle where it belongs.
All bars should be the same length and all joints need to be free and lubed. No clevises like hairpins.
Eastwood sells a special nozzle that you put on your MIG gun. The nozzle holds a stud like a stud gun and then you use your MIG to zap it down to...
was OHV
The Ferguson 4-banger was also used in a midget driven by Wayne Weiler and it was competitive.
Separate names with a comma.
The Jalopy Journal
