The Jalopy Journal
Is it ok to bead blast pistons to remove carbon on the dome and the skirts?:confused:
Is it ok to bead blast pistons to remove carbon the dome and the skirts?:confused:
Is it ok to bead blast pistons to remove carbon on the dome and the skirts?
Would somebody school me on the diffence between sealer and primer??
The Explorer flange on mine had 2 sets of threaded holes. One is metric threads and the other is 7/16-14. Metrc bolts fit the yoke flange with a...
single terminal sender for a flathead is about $50 from a lot of places.
Ok, so how much suspension travel on this? It looks like shocks only have about 1" left
Original factory wiring in old 49 to 52 Ford trucks didn't have fuses. Just 2 circuit breakers. I guess that worked for years but now we are...
I don't know about "direct transfer" but most of the MIG welding we do on our hot rods is not spray transfer. If you're using 75/25 Argon/CO2 mix...
by their nuts.
The engine will die everytime when the battery is disconnected - normal operation.
take a look at www.ford-trucks.com they have a forum for those year pickups.
I got my 1990 AOD transmission rebuilt and re-installed behind the EFI 302. Now I need a TV cable and cannot find one! The tranny and engine...
I wanna ride in Miss Judy!!
Truck rear will be 5 on 5.5" bolt cocked.
You absolutely have way too much shit.
Simple. Fuck 'em.
I'm agreeing with those who think the stock location is best and behind the pumpkin is the worst. Has anybody figured out what tank will sit in...
send a note to Highboy here on the H.A.M.B. He might have some '32 plates.
Thanks, guys. This old 302 surprised me with that much oil pressure. It is a stock pump and 5-30 oil and that pressure was with a cold engine. I'm...
Call smoky Crossman at WAT-A-BLAST SODA BLASTING, 480.620.1727. He is in Chandler. Tell him Jon from Palmer's ROMEO lunch group recommended him.
My old truck has a new/used 1990 Ford HO 5.0 (302). We have not hooked up the old guages yet but we did put a guage on it next to the oil filter....
I will c u there!
:pLucky me! I was able to get my truck licensed today with year of manufacture license plate today. This is easy if you find the right person at...
My project is using early Ford spindles and and F-1 steering box. My plan all along has been to use heim joints instead of tie rod ends. Now...
The yellow and red T was for sale a few years ago at the LARS for $18,500. It had a Model A banger in it. The owner said it was not much of a...
Dishwasher detergent put into the radiator and left in for a week or so?
My old F-1 now has Mustang II/Pinto IFS and I'm shopping for new strut rod bushings. Can somebody tell me why Napa, O'reilly's and Advance Auto...
Hey Blue One - who appointed you as the spell checking HMF?:confused:
Separate names with a comma.
The Jalopy Journal
