The Jalopy Journal
This is a great addition to this event. I'll be there.
Good to know Tony. I'll be talking to you soon.
Thanks for the help guys. I appreciate it.
Is there anyone in the Rochester, NY (or surrounding area) that can properly arc drum brake shoes to the drums? I am running the old manual...
I will find out how the radiator shop welds this on tomorrow when I bring it in.
My damn radiator rod bracket has begun to break off the tank again. This is the third time in about 5 years. Seems to break the same way all the...
I can't even imagine what you are going though. Keep your chin up, and bless you and your kids.
Thanks Ryan for the app, I use it every day.
Man I wish I woulda seen this thread last week. Looked like a great time.
x2 I switched to a mechanical for looks, reliability, and I hated the noise that Carter 4070 made. Now I run the mechanical, and can use my...
Oh and by the way. If it was "Betty" that you drove to this event it sure is a pretty car.
Life is too short to waste any time on these clowns. Ignore them, walk away, and enjoy your time with all the good people and all the nice cars...
Fuel pulls through the Carter pump just fine.
It is better to switch a low current relay coil than the higher current pump. As said above it is a safer way to wire it. Some other tips:...
Learn something new everyday. I guess I was lucky to have my eccentric installed. Looks like you have a choice to make now. Electric Pump, or...
Last year I rebuilt and installed my mech. fuel pump on my 371. I am pretty sure the pump eccrentic is ground into the cam. The pump primed...
You can buy from Dick Spadaro Early Ford Reproductions. http://www.dickspadaro.com
Been running one for years now with no problems. Reliable as hell. The original Ignitor will burn up if ignition left on and motor not running....
Happy Birthday Commander.
OK got it. Thanks for the clarification. Not familiar with that lamp till now. Take care.
Hey Groovy, first of all very nice job on the dash, looks great. The headlights........hard to tell from the pic but are those just like a glass...
The Jalopy Journal. It has all that I need and more. No more magazine subscriptions, no more piles of magazines clogging up rooms. Its all...
Agree. A great company to deal with. I'm lucky to have them close by.
If you think you have vibration issues get those fixed first before you put a new radiator on it. Check to insure your wheels are true, and once...
A few years ago I had a bouncing radiator that eventually sprung leaks due to me bolting it down tight to the frame and chassis vibration. Using...
Hey Swifter, Thanks for taking the time to reply to my question, and thanks for your time with this entire thread. It is a big help to me and...
So Swifter, six years ago I purchased a 32 Ford project from a guy in Missouri. Had a valid Missouri title, and the frame has a brass plate...
I bought a rebuild kit from these folks for my Rocket. Kit was well made, included all gaskets, valves, and diaphrams. My pump works great....
Separate names with a comma.
The Jalopy Journal
