The Jalopy Journal
Richie has some new,bigger slicks... Smokey http://www.radirwheels.com/contents.htm
Thunderbirdesq,Kroozer,need louvers all have you covered with good info...45 degree gives you a lot of weld surface,four link brackets act as...
2750 is still not that heavy. I guess that you could have the spring arched more or add a leaf if you had to. The father that you move the...
What size tubing? How heavy will car be?
I would think that the more angle that there is the more likely it would be to flex or twist. Most 90 degree four link setups have roll bars with...
Like said before get the compression up close to 9:1. The 1.72" intake valves in those power packs will kind of make the engine act like the cam...
Mine always gets here on a Saturday. Not today though. I think that our local post office sucks. 270283 is kind of in my area and he has his... Smokey
Here are some pics from a fellow HAMBer of a minibike reunion in PA a couple weeks ago. Thanks for the pics Joe. Hope to see you guys soon....
With a mild cam the above deal will tell if the cam is off a tooth. But if the cam was off a tooth it would not be an intermittant problem. Good...
How big is the cam and what brand is it? For a quick check on your tooth off thought without takin' everything apart try this. Put number 1...
Look for the casting dates. On the block on top of the bell housing area. On the heads under the valve covers between the intake rockers. Example...
Make yourself a thin piece of sheetmetal about 4 to 6 inches long chop amount wide (3") and do all of your measurin' with that piece. Have...
Separate names with a comma.
The Jalopy Journal
