The Jalopy Journal
I think it’s time to find another truck box to go behind this front end,I will be watching for a new project, lol
That’s a big project, turning out nice. My grandfather’s shop was a box much like that, (box off one of his old milk trucks) I sent many many...
Not a central vacuum but, I use a regular household vacuum to clean the floor when I done. I use a shop vac to vacuum out cars or to clean BIG...
With a name like Bill he has to be a good guy!
Kwik lift maybe?
Looks like fun, in Minnesota we are waiting form some good rain to wash all the salt off the roads
I have a van column that the junkyard cut the bottom of the shaft for the column NOT the intertidal shaft. My plan is to make it 3/4 dd, by...
What is that hearse? I want it.
My off topic gto (front steer) and firebird (rear steer) use the same steering box (same casting number), you might try a box off an A body.
Acme speed shop has not posted on f/b since July of 22
My best advice is to pull the drums off the Chevy 2 and compare. Gm used the same brake shoes for many years and different models. I run the...
I mentioned my car just to say do it right and not to try and pull a fast one on the state. To the o/p you to go back to the seller.
I do now because the car had the vin number on the frame, so the state issued a corrected title. Who knows how long it had the wrong number on the...
A buddy has a shoebox with a more or less stock flathead. He found an old duel exhaust manifold to eliminate the crossover pipe. With porters and...
The problem with this at least in Minnesota they a national database the cross reference vin/serial numbers. I had a car that was registered in...
Mark that took 6 minutes, did you know that off the top of your head, impressed
If can find a number on the bearing take it to a bearing supply house or look on -bay for a nos one
Thanks to Mark no hamber will get ripped off.
With the booster set up that worked but went to the floor, was the brake pedal resting high or could you raise it with a longer push rod from the...
You could put it together with the spring pads not welded to the axle tubes until all the weight is on the car then set your pinion angle and weld...
You would need solid rivets, A air chisel with a bit to mushroom the rivet on a buck, probably find out how on YouTube. There are aluminum...
Herb being a pretty big mopar guy is a HUGE under statement
What’s the over/under on the number of nice you find (I guess 7) I love corn binders, I have a 39 waiting for me to get to.
I like the tail lights but I might remove the bump outs in the quarter panels.
I would guess the radio fuse to be 5 amp maybe 10 at any rate way to lite.
That could be me and my bother other than our hair would be shorter and a 66 Ford wagon in the back around.
I just did a 50 ford last year, with a reproduction stock harness. Converted to 12 volts but he wanted the more stock look. It’s not a bad job if...
The way I see it you are short on floor space with your lift were it is. Can you move t Closer to the stairs or wall? The stairs with the landing...
I have used auto city classic also, they can cut glass for any car. They had paper patterns for my Pontiac, they had books of patterns. they also...
I was on a road trip with my car, stopped at a junkyard to look around. Ask if I could get a picture of my car “hanging with some friends”
Separate names with a comma.
The Jalopy Journal
