The Jalopy Journal
After looking at the 33-34 I saw that they are fixed posts. I looked at the 32 posts and it looks like they might work for this. I'm also looking...
M/T products Boling brothers has everything you need. Just making sure to get 1-3/4" wide shoes.
I was looking at the windshield posts and would like to be able to fold it down for the total wind in face. 1 was looking at modifying the 27...
For some reason the hydraulic clutch release bearings that are inside the bell housing fail and leak in a very short time after using DOT 5 brake...
To install 39-48 hydraulic brakes on a Model A rear end you will need to cut a notch in the backing plates to clear the spring perch. The other...
Looks like I found a radiator that can be made to work. I will have to do some modification to the top tank to clear the grill shell and filler...
I am leaning towards using a stock 27 T grill shell. I think that if I use the earlier radiator (low height) and modify the mounts I can clear the...
That is normal to not be able to move the clutch fork with your hand. Your leg is much stronger and when you add the multiplication of the pedal...
I traded fastrnu for his modified project that has been sitting for the last few years. I will be finishing the build and posting the progress...
Update: fastrnu is going a totally different direction in life. I traded him for the modified and am going to finish it. I will start a new thread...
Ned always like hearing your thoughts on my crazy ideas. I like to think outside the box, I don't think you ever saw the box. I have looked at...
Yes this would be IRS for sure. The thinking is that I would run a full size 1-1/4" lower shaft through the counter shaft. I would bore out the...
I was looking at the A833 specs and saw that there are at least 4 gear sets including one with overdrive. Then the thought came to me that you...
That's sweet! The reason that the transmission is canted is because the shaft centers are different from the quick change. The A833/NP440...
I am now looking for an A833/NP440 transmission. Preferably in Washington state. It can be the overdrive or non overdrive, aluminum or cast iron case.
I can, is this for balancing purposes?
Thanks, that's good to know. The reason I was thinking about casting it is that I can incorporate a central lower shaft, an internal shift rail...
That's pretty cool looking. It's mounted upside down and offset because the shaft center of the T10 is 3.03" center to center and doesn't line up...
My friend was talking about the transaxle in the 61-63 Pontiac Tempest and it got me to thinking about one of my back burner ideas. The Champ...
I was looking at selling those remote boosters but the buy-in cost was pretty high compared to the demand. Master power brakes sells them. They...
I'm looking at doing a run of these in January of 2021 and am looking for those who want them. You can PM me.
On a lightweight car like a model A I prefer to use an 8" mustang or comparable rear end. They are lighter than the 9" and give you a better ride...
I have upgraded some of the parts in theses kits. The bottom fitting is now adaptable to either 1/4" hose or 1/4" hard line. The master cylinder...
We have updated our pricing and our kits with better parts. The adapter caps are custom machined and the fitting in the bottom of the reservoir is...
If you have dropped beams then the spindle will be farther up this will cause the main tie rod to be angled upwards to the passenger side and also...
The price is $245 per pair. They are out of stock at this time. You can see them at highway101ind.com
Yes
The wide five hubs are out there 37-39 front and 36-39 rear. They are a bit hard to find but are on eBay all the time. 12.060 is max for turning...
MT products sells them, They are owned by Bowling Brothers. Just make sure you get the one's with the 1-3/4" shoes if you are using the stock wide...
Could it be true that I have supplied the world with wide five adapters and there is now no need for any more?
Separate names with a comma.
The Jalopy Journal
