The Jalopy Journal
I'll echo what 40stude said. If you posted without doing a proper introduction you were tarred and feathered and run out of town on the back of...
No on the pipes. A real spot I would say yes to. It would fit with the lettering but it would need to be a little worn and not bright and...
Cool. Now I know what they drove before IROC's :)
I'm still trying to figure out what a "quiston" is :)
mmmmmmmm, samantha brown..........:)
You mean these? http://www.speedwaymotors.com/p/1719,,_Megaphones.html
Try this link http://www2.dana.com/pdf/IJ900-04.PDF you should be able to find your joint here and give the parts house the Spicer number. If...
if you are worried about te "looks" of the standard grade 8 stuff. Either paint them or get the chromed plastic caps they make and cover them up.
Man......I'm no good on tests. Can you make it multiple choice?
http://static.summitracing.com/global/images/prod/large/aer-fbm1069_w.jpg is a pic. Try Racer Part Wholesale at www.racerpartswholesale.com
The oil hole doesn't matter. You can put the lifter in eitherway. As long as all the rocker arms are getting oil you should be fine. I have...
Whenever I need to gas up in Jersey I just get out and start pumping it. Thye never seem to mind. On the flipside of this question. What do...
They don't say "Might Suddenly Die" for noting. If you do get one, wire it so you can take it out of the loop in case it dies so you won't get...
That's a 93-97 Camaro exhaust manilfod. You may want to get a set of manifolds off a 94-6 Impala/Caprice/Buick Roadmaster etc. They have a...
Yes the Mastercool one works on stainless.
Is it just me or does the front or rear of the trailer look a little like the Helmet from the movie "Rocketeer"...
use a sawzall and cut the bolt on each side of the spring bushing. The bolt is rusted to the steel sleeve in the bushing. The spring will just...
You should get some real Vacuum hose. Your oil line may collapse after it's used a while....
I didn't think it was a garage until it had some oil stains? :confused:
I believe it's actually "an awesome set of tools" :) That'll buff out
working fine for me on IE version 6.0
Couple of things. 1) Leave the motor stock. It has plenty of power for towing. 2) Change the tranny fluid and put a good synthetic in it. I have...
I'm with NealinCA. Negley Roadster
I don't drive my car/truck to work for one reason. They give me a company vehicle and pay for the gas. I leave my stuff parked and drive theirs....
I've got one 15 mi nutes from the house with 3 screens. They even have some of the speakers still in use....
The knock sensor needs to go in the coolant drain in the bottom of the block above the pan rails mid way down the motor. It can go in either...
Shrum, I didn't miss the "point". Messing with points constantly is like shoveling snow. The first few times it's "fun" and "exciting" to...
Just to throw in .02. I was looking at the Pertronix Catalog. They list some Flathead applications. Keep the traditional look of the Dizzy and...
+230000 for steel
If the Ball is not flat spotted and the springs on the socket and cups are goo, there's no reason to not reuse the parts. Some new trucks still...
Separate names with a comma.
The Jalopy Journal
