The Jalopy Journal
The value of something is determined by what people will pay. This car will get that much or more on Ebay. Look at how well maintained it looks....
Cerium oxiode with a felt polishing wheel. Use water to keep the glass cool and to hold the powder. This should get the light scratches out if...
There was a Real Stories From the ER show that had a girl that had repeated headaches. It turned out to be a '57 chevy her dad restored leaking...
I bought a 1937 Ford Coupe that had the floors replaced with sheet steel. The body is mocked on the frame and the holes can be transfered. What...
Look at some of the expensive vehicles that are out now. They combine exposed metal looking bezels with plastic covers. Some highlight each LED....
IMO If you are going to use this as a dual master cylinder/balance bar set up I would find smaller bores. 1.125 D. is huge. You would need a...
Hey Chip Foose and Overhauling should take this on! It would make for one awesome human and drag racing interest story.
I am running firewall mounted dual master brake cylinders. I have disc and drums. I think 1" is too large. You will have a short pedal travel...
They made an aluminum '40 coupe before the copper one. It was recently auctioned off on ebay. here is a build link for the '40...
What a great way to stop people from asking if they are for sale! Sure if someone really wants them. Bet his door bell has seen less use.
They have roof fans. They have a plastic cover on the outside to resist weather. They are controlled by a thermostat (included) Home Depot...
Heres a quicky.
Some magazine a while back had an article. I think it was R&C. Must have been about 6 years ago. Not as detailed as a manual but its a start.
I bought a set from Early Wheel Company and had no problems. I needed custom offsets and revervesed rear wheels. I plan on selling the set on...
We used to have a chevy engine that had spark plug spacers. They went between the spark plug and the head. They may reduce the compression by...
Edsels Hot rod is awesome. There is a great article about it in Automobile Magazine June 2000. Here are two pictures from the article.
I would not touch the property. Who knows how much oil and gas has leaked into the ground. I don't think clean-up would be worth it!
I think it would be worth looking at welding a filler piece in. Close the whole area up matching the raised shape and top and bottom detail. Then...
I think the high prices we are seeing is in part due to Barret Jackson. People see the high price and fast climb in value of cars on Barret...
Heres a picture
Lil John Butteras' Model T has to be on the list http://www.barrett-jackson.com/auctionresults/common/cardetail.asp?id=175178
What about using Caltracks. Site below shows an install. http://projectautos.com/69-camaro/4-racing_project.html
I have the trans cross member out for alittle fix-up and have access to the governor. I would like to take the best guess at changing the springs...
I think they were produced in the '50s also. I have seen many that have the bolt holes not aligned top and bottom. The early chevy heads had a...
Keep your eyes open you will find something. Look at the plymouth the 1933 is pretty cool and affordable!
I used to live on the east side. About 7 years ago I moved out here to be closer to work. I live on a dirt road now! Really different.
Anyone know when the Wilson Barn (Livonia,MI) show is?
http://www.cruisin-usa.com/mievnts.html One source on line for swap meets/shows.
Not that I have heard. The barn (30x100) came down though.
Separate names with a comma.
The Jalopy Journal
