The Jalopy Journal
junkyardroad Hey don't quit it looks like your getting close. Get back out there and go to work.
I would go for it. The old Chevys are a tough build but everybody does not have one. I'm working on a 32 sedan and I'm learning a lot. It's slow...
I cruised us31 in Clarksville In. went from Frisches there to Frisches on Spring street in New Albany In. I was driving the silevr Trans Am
Your front end looks great, keep us posted on your progress
Tinbender; I uploaded the pictures to my profile page. I have not yet figured out how to upload them to a thread yet.
no the filler has not been welded to the frame work other than around the edges. The bows as I'm going to call them have had a slight arch to them...
it is has welds about 1" long spaced every 4-5 inches. It is very ridgid then the filler panel was recessed into the openning in the roof.
Using a flashlight will be impossable as the guy I bought the car from used 1/2" sq. tubing to stiffen the the openning before he put in the...
I understand the importance of welding the panel in solid and how the metal moves at different rates. I'm more concerned about the pin hole where...
A lot of the welding was already done, I just needed to fill in between the welds.
I plan on keeping the car for a few years but I don't want to pass on trouble on to someone else. I'm going to put on two coats of Rust bullet...
does every pin hole need to be filled?
Where will the problem come in when it fails If it is not completely welded?
I have welded one side and across the back which took about three hours. I would weld a spot 1/2" lg move down 4-5 inches and weld again,...
What I was told by a engine builder was to use black weather strip adhehsive on the oil pan gasket and front and rear seal. Put plenty in the...
Rich My thought was to fill the area between the welds the best I can then remove the paint from the rest of the panel and put on a a product...
Hello Gordon welcome to the H.a.m.b. from Ky.
I bought a 1932 Chevy sedan project car. The guy I bought the car from started to install a filler panel in the roof. He has it spot welded 3-4...
I like and use a product that is made by LPS that is called KB-88, works great. Spray it on let it set a while and it will work its way into the...
I read a a thread on here just last week about a car that was bought from a guy"s daughter who had died that lived in Mi. Car had been in storage...
Tims37chevy Love the pictures. just put them on as a screen saver. thanks 62131
lets try it again
just uploaded my hope it worked
If you just want to run a roller chain type drive but do not want the noise, oily mess from lubrication of the chain, try looking into a Gate's...
TFoch I would like to see them. I'm thinking of removing the pillar that the hinges are mounted to now and putting a layer of 1/4" plate behind it...
I purchased a 32 chevy project car and most of the wood has been replaced with sq. tubing, except for the A pilars,does anybody have any coments...
I found it in Arkansas
Rich I think I met you at the Glasgow Cruise into Fall rod run on the square.
Building a 32 chevy sedan into street rod, will be looking for parts, just finished a 38 chevy coupe last year really enjoyed it this year making...
Separate names with a comma.
The Jalopy Journal
