The Jalopy Journal
I messaged Edelbrock and that was their response as well, possibly machined wrong. The purpose of swapping to inverted flare was to rid the AN...
That’s one of the options and am thinking that I may silver solder as well
They are 1904 carbs and the fittings from Edlebrock with the inverted flare are for a marine carb. The installation manual that is included with...
Yes it is.
I was in the process of replacing the AN braided fuel line to steel on my traditional build 1932 Ford Vicky with a Buick nailhead and dual quads....
Thanks
My Vicky has a 401 using a Speed Gems adapter and TKO 600 trans. I have a fibreglass cover, which no where fits. Anyone with a similar combination...
Probably been asked but I am not having any luck on a search. My Vicky has a 401 Nailhead and po installed a Pertronix igniter. I bought a couple...
It’s a Vintique 40 Ford version
As per my post above. There was a small burr on the steering shaft that was interfering with the bushing. I cleaned it up and gently tapped it in...
My 32 Vicky with a 401 had a upper flex hose which stuck out like a sore thumb. After countless hours on the Dayco website I went to the local...
3 window dash is painted and back in the Vicky. Next task is to sort through the wiring. [ATTACH]
No problem and you could have hi lighted something I missed.
It’s a Vicky [ATTACH]
Yes it does
[ATTACH] Problem solved. There must have been a small burr at the steering wheel end of the shaft from manufacturing. I cleaned it up with a file...
I agree.
Column and kit is Limeworks
I agree but the nylon bushing is bigger in diameter than the steering shaft. Just don’t want to grind it to fit then find out that it’s not...
I would think so as well but it doesn’t fit. The instructions are vague
Instructions sure don’t give a lot of details. Is the nylon bushing supposed to sit inside the shaft ?[ATTACH]
New garage equals bigger workspace. Tackling some wiring issues [ATTACH] [ATTACH] [ATTACH]
Winters QC under the deuce Vicky [ATTACH] [ATTACH]
Lots of loose ends to tie up and the 34 Buick panel is in. Not liking the black paint and will rethink what to do once my new garage is finished...
Thanks for the wealth of info. I was lucky enough to find a crank tach drive for my flathead. [ATTACH]
Thanks alchemy and appreciate your insight.
Still trying to figure out approximately what year it is
[ATTACH] [ATTACH] [ATTACH] [ATTACH] It’s in. [ATTACH] [ATTACH]
The Vicky is back home after a long visit to #victoryrodandcustom for much needed work. The plan is to finish it to the point of driving so it can...
Separate names with a comma.
The Jalopy Journal
