The Jalopy Journal
Really cool project. I applaud you for tackling something a bit different. Getting through the challenges I'm sure is really rewarding. Keep it...
Here in Canada, we have a place called princess auto (you can Google their website). They have quite a good selection of coolant supplied heaters...
Thankyou guys for all the suggestions here. I have zero experience with 265 and limited with 283 even. He is a fantastic body guy but limited in...
I've got a friend that is planning to build a 265 sbc. His target for this is that it still be very streetable with a nice healthy sound at idle...
I recently seen there's a post showing hop up magazine is back in production. I'll be looking into a subscription for this magazine right away. I...
Maybe I'm misunderstanding, but there shouldn't be power going to the distributor. Only a ground wire from the points to the negative side of the...
Here are some of my cars on my to do list. Please don't give me the gears about them sitting and rotting outside, or bitch that they ain't for...
Maybe mount the master under the dash and use a remote vac booster.
I built a Coe 40 Ford years back, and mounted the booster inside the firewall (dash side) and master cylinder on the outside (engine side)....
I'd kinda lean towards leaving them dry myself. When I was a teen, I got to borrow mom and dad's car to take a chick out on a date. So I cleaned...
I realize this isn't what you asked, but be careful to not get into a position where you should have a licensed product. Many automotive...
If you feel you need to warm up the carb bases bad enough, go to a local junkyard and spend some time shopping. There were several vehicles made...
The purpose of a heated intake is really not so much about the intake. More so about the carb throttle plate area. In cold damp weather as the air...
Yeah, swade's avatar definitely "perks" up the mood here.
In my model A, I made my own set up using a modified pedal assembly from a F1, a shortened stock Chevy clutch fork, and a e brake cable from a mid...
I apologize. I know it seems like a really dumb question to ask about aesthetics. It won't be a street car (Not allowed here), realistically will...
I realize there is likely no simple answer to this question as there were so many different types. What is considered the best aesthetically...
I've never seen one, but my personal opinion is that with a good cork gasket (Not overtightened) it would be fine. There's gaskets under sending...
I went in 98, and want to go again. Maybe this year if I get a good comfortable old ride to take there. In 98 I took my in-laws ant eater Pontiac...
I realize we are in completely different climates, but there are some things that hold true no matter where you're at. Insulation is one of them....
Silly question here but the very last picture with the Zimmerman gulf station... it looks like the cars would fill up beside the curb? It doesn't...
Slant 6 dodge.....the engine with a love hate relationship as a younger guy. I hated them then because they were just a 6 cylinder and...
I'd personally advise against using a t for that. It will be a great place for an air pocket to develop and then the sensor for both the fan and...
Just be prepared that once the truck is his, he can do what he wants with it. I'm not questioning his good intentions to keep grandpa's truck, but...
N Not a simple bolt in, but a pretty easy swap really.
If the timing marks are grooved into the pulley, I like to clean them first with brake clean, and then fill them with white chalk or white tire...
This doesn't answer your question, but it helps sometimes to know there are others out there with different setups. My special 2 Dr sedan is a 64,...
Separate names with a comma.
The Jalopy Journal
