The Jalopy Journal
I can't find it. As I recall, he routed out a piece of plywood..two pieces actually and made the "finger notches in them, placed and clamped them...
Last year someone did a tech article...I'll try to dig it up.
Most likely inner race-bearing and outer race...much easier to do with a die grinder, etc...have mine from the last Dana 44 I set up...hope the...
Appeciate that, "they" are still made, just looking for other options:) Thanks
So, I had a bad coil on a 221...being a miser and broke as a joke, I took the coil apart, crimped in to the points side, and stuck a piece of...
I'd never sell my Dad's '57 Chevy PU he bought new, and I've had it since I was 16...but to clarify, I'd never sell it for another car, but would...
I'll try to get pics, but in my Dad's Pete, I used stainless strips and letter stamped them, used model paint brush (black paint) then wiped fast...
Good stuff!
I'll be darn...to think my pop's could have been rich making them...lol. One of the best jobs I ever had sorting nuts and bolts at 5 or 6 years old!
You should have a "vent tube" sorta thing that runs up along side the filler tube, and back to the neck to allow air to escape...it might be...
Thanks, my somehow got "unchecked",,,odd...appreciate the help!
I hit "reply" Send the message But my sent message does not show up in my "sent" folder... I then have to create a new message and send it,...
[IMG] [IMG] [IMG] [IMG]
Funny, I see your pic tags when I quote your post, but not IN your post.
Yep!
Eff the haters, if the seller backs the product and you save coin, do it.
Have some fun! PS...it already was 12 volt:)
Too much clear on it;)
You buy, I'll fly....transfer i sitting idle these days...I need work!
It was an open drive, never measured mine but many to choose from
What is meant by "plug off" ? Thanks
40 or so days doesn't seem like preferential treatment to me;)
No...mine have just the one welting between frame and wood...the cab sat directly on the wood. Assuming mine was done correctly (taking a...
So true (locking in mistakes), I went to get a '31/32 Dodge registered in my name... Lady punched in some things into the computer and out...
My repro ones (from late 60's/early 70's) have belting between the frame and the wood block...roughly 1/4inch as well...keep this in mind...you...
Brutal
Re verify your plug wires are routed correctly, the adjust the timing. Vacuum should return to normal:)
-I wasn't referring to a direct fit type of radiator, he mentioned he's going to run a newer engine...and with plenty of room on the old Ford,...
I think the tank may be a weak link running a high pressure cap. You should be able to get a fit through Jegs/Summit, etc, for about 100-125 with...
There's a thrust nut on the bottom of the box as well, been a bit, but I think I had to bend a retainer tab over, and used a drift punch to snug...
Separate names with a comma.
The Jalopy Journal
