The Jalopy Journal
Glad I could help fellas and thank's for the accolades. One more suggestion. When you add the boxing plate bevel the edge and fit it about 3/8"...
I think adding the half circle and then boxing the open side is enough. I ran a generic model where the notch cuts about half way through the...
How about a stock '26='27 tank?
Nice improvement! Is your coupe as solid as it appears?
Awesome T-modified... I gotta ask though, can I vote none of the above? Looks great just like this! Don't be a hater.. you posted the photo :p
I spent some time analyzing c-notches a few years back. How much strength you really need depends on how the rear suspension is mounted (coil...
Wood Iz Guud :D I have wood floorboards in my Model T roadster, and used steel on my Model A Sedan. If I had it to do over I'd have used wood...
I'd have unloaded the '47 Plymouth rather than endanger other motorists because of my laziness.... but that's just me....
A link and a diagram... http://www.performanceplustire.com/tech.info/measuring-your-bolt-pattern
I put a set on my OT 69 Camaro as temporary header mufflers... liked the sound so much I've been running them for 6 years.
And your changing the Springs and Panhard Ends at the same time... :confused:
Candid Camera Edition [IMG]
It depends on what you use. Check out the photos below. Both these rotors fit a Chevelle, the one on the left is a CPP "Zero" offset unit, the one...
46stude speaketh the truth... :D
Disc brake rotors typically push the wheel mounting surface out farther away from the vehicle compared to the stock drum brake set-up, thus they...
Scrub Radius.... [IMG] A thread about Scrub Radius here on the H.A.M.B.:...
Good spacers will have studs and will engage on the existing hub, and they will have a hub so you don't loose hubcentricity. You loose nothing and...
Great thread, very interesting. Listen to Dicks advice and change one thing at a time. Change the one panhard heim out for the fixed one and...
Chevy Duty is now Classic Parts of America http://www.classicparts.com/ but the OP is looking for Ford parts....
Classic Parts of America has done right by me and my '65 C10, but they don't sell Ford parts. I originally bought parts from LMC, poor quality...
Nope... Dad wasn't, but Grandpa was. Dad would break shit, Grandpa would fix it. RIP to both of them. Different strokes for different folks.
It's your neighborhood and their neighborhood. Life is short... don't do anything in front of your neighbors that you wouldn't do in front of...
Glad the shock mounts worked for ya!
Thanks for the accolades guys. Here's a link to the build thread for my truck: http://talk.classicparts.com/showthread.php?t=13928 Just...
My '27 RPU [IMG]
Too Chop, Or Not To Chop? Chop :D
These guys have a lot of T parts and pieces: http://modelthaven.com/
My grandafther 1924 Model T coupe, circa 1969'ish My dad's driveway When my grandfather drove his fenderless 24 T coupe into dad's...
Thanks for the tip :cool:
Filled the tranny today with GL-4 and then decided to see if the tailhousing bolts could indeed be used as a drain. I removed the three lowest...
Separate names with a comma.
The Jalopy Journal
