The Jalopy Journal
Colchester, CT
Does Ford Motor Company know about that???? ;) Rumor has it they use motor oil in their cars too....
I had a 4 inch dropped axle in my 48 chevy pickup for a couple years. I heated and bent the steerings arms with my torch. Make sure to let...
I got it off! Quality puller = no problem. No heat, no banging, just a breaker bar (and maybe a beer or two.) Thanks again for everyone's...
Thanks guys...I'll give the recommendations a try. I broke the cheap chinese puller this morning. I'll hunt down a quality one the next couple...
I gave it a little heat and cranked on it with a breaker bar/ 4ft pipe. I then tapped around the puller and also around the balancer. It still...
Thanks guys..I'll try a "little" heat tomorrow.
I'm trying to remove a harmonic balancer from a SBC and the damn thing won't come off. I'm using a puller (yes the center bolt is removed) and...
Russco, Thanks. It looks like you called it. It's cupped on each side around the valve stem. Thanks again! -Rich
I have a 1989 suburban 350 motor in my 48 chevy truck and I'm changing the cam, lifters, etc. Does this year have self aligning rocker arms or...
Have you tried a hammer??????
I think he has an old Torker intake on it. Would that require that adapter plate? It sure seams like it behaves like the secondaries are...
We've had it apart a couple times and can't seem to find anything clogged. We sprayed cleaner through the jets, took out the air mixture screws...
Did you try spraying around the front or back of the intake where it meets the block? I can also stop over for a little while this weekend and we...
I get the car and the girl...but I don't really understand the chickens...
Camping out there was the best. I remember a guy next to us had a coffin he trailered behind his rod. He'd sleep in the coffin next to our camp....
Here's a shot after we filled the roof on my 34. It's the only photo I could find. [IMG]
I have 34 chevy that we filled the roof in. I made a couple cardboard templates that measured the arc going from front to back and the from side...
I replaced the wood in the door posts and some of the wood in the doors on my 34. I put a steel floor in. That was about 12 years ago. No...
Here's my 48 3100... [IMG] [IMG] [IMG]
My 48...no frills...just simple [IMG] [IMG] [IMG]
Here's mine after a few updates, etc. [IMG] [IMG] [IMG]
I believe there is a small screw holding the window track in place on the latch side of the door. You should be able to remove the track screw,...
Thanks again for the compliments guys. -Rich
because I like it the way it is.....:)
The stock column worked out much better than I had planned. I just lowered the position of column on the firewall to clear the headers and...
Separate names with a comma.
The Jalopy Journal
