The Jalopy Journal
Macon Co. checking in.
Being able to post a pic. was one of my new years resolutions. Being able to repeat it at will may be another story. I am not that sharp at these...
[IMG] My first attempt at posting a pic. This is the 49 at a local car show last week. Hud
I went up and checked them out a few days before the auction. A lot of the cars were junk in my opinion. There were less than 10 complete cars....
I did not attend but have some of the results. The 67 camaro brought 6200. My neighbor bought it. The 58 Olds brought over 8000. Some of the parts...
Hey Ken. Hudsonator knows him. L Hud
[IMG] This brings back memories. I loaded everything in the world on these birds. In a place called Phan Rang Vietam. Hud
Contact PaceRacer 50 here on the forum. He makes a shifter of the hydro. Hud
[IMG] Not all flatheads were V8. The Hudson was still kicking butt in 65. That was 10 yrs after the Chevy V8.
The nylock nuts are designed to be used with threads that have been worn or deterated. Some tractor hubs sit at an angle and apply a lot of...
Go over to Inliners Inernational.org they have a lot of info on transplanting the 292 into different vehicles. Hope this helps. Hud
If this is going to be a driver, you might consider propane pistons. They will raise the compression but not like flat tops at zero deck. A good...
[IMG][IMG] Rudy Bennetts Hornet powered Jet.
I couldn't make it either. But found a alternative. Bangshift.com Has live video of the drags and a bunch of pics. Got to catch some of the...
Dale Cooper is the man for motor parts. 5138216200 hope this helps Hud
Hey captmullette. Would you know what day those ole Hudsons are going to run? I will not make it up this year but like to watch them run....
Welcome from Macon Co. This is the place with a wealth of info. Hud
I went there in 64-65 with some buddies. One ran a new Falcon, the other ran a Tempest. Nothing special, just a group of guys out having a good...
With out the original motor, which has the same # , the best bet is to look at those places suggested by the thread over on the Hudson board at...
Hey Jack of all Trades, I never had the privilege of going to Libya. Had a chance to but did not. nichols in FL. I was there all of 68 and most...
Love the pics of the planes. I was a weapons mech. in the USAF. Worked on the T33, F102, RF4 at Ramstein AB and the F100 at Phang Rang AB Vietnam....
I'm with you motoandy. When I first found this board, I told all my friends about the Honkey Ass board. A friend got me straight. Hud
Congrats. The world needs more Hudsons.
It has been a few years. My son had one done by them and it was super work. He had a crank stroked, balanced, and chromed. It was not cheap, but...
Crankshaft Specialist in Memphis. None better for any crank work. If you want it stroked they do that and anything you want. Hope this helps Hud
When you put the trans in reverse , it locks out the od. It will not freewheel in reverse. The od only works in forward gears. If it were not...
Love this thread. Keep them coming.
If you are going to run I 40 all the way, TN has a lot to offer. Memphis, Nashville,Knoxville,Piegon Forge, Gatlinburg, They are all on 40 and...
A friend of mine runs a T5 behind his 251 Mopar, in his Ply. He has had to replace it a couple of times. The T5 does not like all that torque in...
There is a good thread over on the Hudson board at classic car. It shows a floor shift kit modified to work. The best one is a guy used a Jeep...
Separate names with a comma.
The Jalopy Journal
