The Jalopy Journal
[ATTACH][ATTACH] The night time is the right time! Sent from my SM-G935V using H.A.M.B. mobile app
[ATTACH][ATTACH] Work in progress! Sent from my SM-G935V using H.A.M.B. mobile app
Welcome David, I'm sure you'll be able to get the information your looking for here! I have a 29 4dr sedan and yes there's a lot of wood involved....
[ATTACH] Sent from my SM-G935V using H.A.M.B. mobile app
You don't have to heat the tube to get it to collapse? It will collapse 1/8 mild tube?
Mocked up on my 29 frame (frames upside-down right to welding plate on bottom side) but I have a 30 frame for it.
You replacing all the wood with steel? I'm building a car for PRV in Jersey and all I have is the sheet metal aside from the cowl (which is from...
Did you have enough of the sill to get a pattern or you winging it?
Called Bill up and he told me my main sills are 2 to 3 year back order! Called Jim Rodman at Autowood Restoration $275.00 shipping included and...
Bill Cartwright is supposed to have the best quality stuff from what I'm told. He has most stuff in stock and ready to ship but he does not do...
I have a 29 that I have to replace the main sills in so any pics or process info would be awesome. Keep us posted and good luck!
Damb the weather let's race!
Not a banjo, it's out of a 52 chevy deluxe. Does that change my plans? I've never cut one open before.
WOW! $6.00 each for used clamps. Found a set of 4 for $12 and a set of 9 for $40 on ebay. Need 3 more, if I can't find them I may have no choice.
I have the rings just don't have the hardware to mount them.
Jaxon rim clamps! Found some on ebay but I'm short 3. Anybody 3 extra laying around? $$$$$$$$$$$$$$$$$$$$$$$$
That's the way I would like to do instead of a coupler. I think reaming the tube and welding in the slug will keep tube truer than relying on a...
Logged in at AACA, quite the opposite crowd over there!
Ok, group hug so we can get back to what we love and live for THE CARS!
You can't find a better resource for old school automotive than this place. The knowledge gained and support from fellow hotrod enthusiasts is...
If anyone has one that they can post a pictures of then maybe I can reproduce them myself.
Ok these are the wheels I have. The inside of the wheel has a hole to pass what I believe is the equivalent of a carriage bolt with basically one...
Awesome video!
I can post a picture of the actual wheels I have but this is what they look like. There's four slots that accept the "retainer hardware" that I...
Picked up a 1930 chassis to build a speedster for PRV event that came with the disk clincher rims but they didn't have the retaining nuts to hold...
Thanks for everyone's input hopefully I can pull it of. I have three rear sections so I can only screw it up twice. Hopefully third times a charm!
Has anybody or does anybody know of a way to shorten a torque tube rear to allow set back of a motor?
Sold!
Maybe this could turn into an event like the aussie's have! http:// www.chopped.com.au/
Separate names with a comma.
The Jalopy Journal
