The Jalopy Journal
With a 4 wire hookup you have a red, black, white and bare copper wires. The red and black are connected to the 2 pole breaker and both the white...
There was a high performance 352 in 1960 that was rated at 360 HP. It was equiped with a Holley 4 bbl carb, solid lifter cam and bigger valves...
The above website lists the 8BA at 569 pounds. The 302/5.0 Fords are listed between 411 & 460. I should be fairly easy to build a 5.0 with...
Anybody have the list of what various engines Weigh? Flatheads, SBC's, SBF's, HEMI's, etc. -- Chuck
From what I have read some of the electronic aftermarket speedometers have a calibration button on them that you push at the start and at the end...
Thanks Mike - Flat Ernie emailed me some info also. One more question - can the electronic speedometer sender be used with the aftermarket...
I am considering using a mustang T-5 behind a 302 Ford in a '50 shoebox. From what I have read it looks like the mustang transmission will...
I used a early Bronco pan (late 60's) in my 302 powered 36 Ford and if I remember right it was a rear sump pan. I also had to use the oil pickup,...
Modifiedracer - Would you be interested in selling that MC-9?? I have been looking for a Mac Kart engine for a while. -- Chuck
The first year of the automatic in a ford was '51. Many years ago the trick floor shifter was to take a column shifter out of any of the Fords...
I plan to install a small block ford and a manual transmission in my 50' ford. If I use a T-5 and shifter from a 5.0 Mustang where will the...
Separate names with a comma.
The Jalopy Journal
